17.11.2012 Views

HP Officejet 6000 (E609) Printer Series User Guide - IT Info

HP Officejet 6000 (E609) Printer Series User Guide - IT Info

HP Officejet 6000 (E609) Printer Series User Guide - IT Info

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter 4<br />

3. 802.11 Wireless (some models): Shows information about your wireless network<br />

connection, such as the hostname, IP address, subnet mask, default gateway, and<br />

server.<br />

4. Miscellaneous: Shows information, such as the administrator details.<br />

• mDNS: Shows information about the active Multicast Domain Name System<br />

(mDNS) connection. mDNS services are typically used on small networks for IP<br />

address and name resolution (through UDP port 5353) where a conventional DNS<br />

server is not used.<br />

• SLP: Shows information about the current Service Location Protocol (SLP)<br />

connection. SLP is used by network management applications for device<br />

management. The device supports SNMPv1 protocol on IP networks.<br />

Configure the device (Windows)<br />

You can connect the device directly to a computer, or you can share the device among<br />

other users on a network.<br />

NOTE: Microsoft Internet Explorer 6.0 must be installed on the computer system to<br />

run the installation program.<br />

Also, you must have administrator privileges to install a printer driver on Windows<br />

2000, Windows XP, or Windows Vista.<br />

When setting up the device, <strong>HP</strong> recommends that you connect it after you install the<br />

software because the installation program is designed to provide you with the easiest<br />

setup experience. However, if you have connected the cable first, see To connect the<br />

device before installing the software.<br />

Direct connection<br />

You can connect the device directly to your computer using a USB cable.<br />

NOTE: If you install the device software and connect the device to a computer<br />

running Windows, you can connect additional devices to the same computer with USB<br />

cables without reinstalling the device software.<br />

When setting up the device, <strong>HP</strong> recommends that you connect the device when prompted<br />

by the installation software because the installation program is designed to provide you<br />

with the easiest setup experience. However, if you have connected the cable first, see<br />

To connect the device before installing the software.<br />

To install the software before connecting the device (recommended)<br />

1. Close any applications that are running.<br />

2. Insert the Starter CD into the CD drive. The CD menu runs automatically. If the CD<br />

menu does not start automatically, double-click the setup icon on the Starter CD.<br />

3. On the CD menu, click Install USB-connected Device and follow the onscreen<br />

instructions.<br />

42 Configure and manage

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!