B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

Explanation (1) Bar code number
When drawing by the Data Command ([ESC] RB), the format designated by the
bar code number is selected.
(2) Print origin of coordinates
Origin of
coordinates
(0, 0)
Backing paper
Label
Backing paper
Label
Effective
print
length
Print origin of
coordinates
Effective
print
length
Print origin of
coordinates
0
X
Effective
print width
Y
Effective
print width
Origin of
coordinates
(0, 0)
Y
Paper feed direction
X
0
Paper feed direction
[Print direction: Printing bottom first]
[Print direction: Printing top first]
The print origin of coordinates must be set so that the bar code drawing result will be
within the effective print area set by the Label Size Set Command ([ESC] D).
[Effective print area]
[mm]
Model B-SX4T B-SX5T
Item
Issue mode
Cut
Batch Strip cutter Head-up
operation
not
performed
Swing Rotary cutter Swing Rotary cutter
Head-up
operation
performed
Cut
Batch Strip cutter Head-up
operation
not
performed
Head-up
operation
performed
Effective print width Min. 10.0 10.0
Max. 104.0 128.0
Effective print
length
3 ips: 3 ips:
3 ips: 3 ips:
79.0 30.0
79.0 23.0
Label Min. 6.0 21.4 23.0 6 ips: 6 ips: 6.0 21.4 23.0 5 ips: 5 ips:
91.0 30.0
87.0 23.0
10 ips: –
(NOTE 1)
10 ips: –
(NOTE 1)
8 ips:
98.0
8 ips:
23.0
Max. 1496.0 1492.0 1496.0 1492.0
3 ips: 28.0 3 ips: 28.0
Tag Min. 8.0 – 23.4 6 ips: 28.0 8.0 – 23.4 5 ips: 28.0
10 ips: – (NOTE 1) 8 ips: 36.0
Max. 1498.0 – 1498.0 1498.0 – 1498.0
NOTE 1: The use of the rotary cutter at 10 ips is not supported for the B-SX4T.
- 118 -