B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

(9) Writable character set: 42 (24×24 dots )
Character width 24 dots
Nibble mode
1 30H 2 30H 3 30H 4 30H 5 30H 6 30H
Character
height
24 dots
7 30H 8 30H 9 33H
•
•
•
•
• 137 30H 138 30H
139 30H 140 30H 141 30H 142 30H 143 30H 144 30H
Hex. mode
4
8
4
4
8
4
4
8
4
1 00H 2 00H 3 00H
4 00H 5 3CH 6 00H
•
•
•
•
67 00H 68 3CH 69 00H
70 00H 71 00H 72 00H
[Nibble mode]
(1) The writable character data to be stored is separated into four dot units and sent in the
following order (1 → 144). (High order digit: “3”)
(2) The data of writable characters to be stored is 30H to 3FH.
(3) The data count of writable characters to be stored should be 144 bytes.
[Hex. mode]
(1) The writable character data to be stored is separated into eight dot units and sent in
the following order (1 → 72).
(2) The data of writable characters to be stored is 00H to FFH.
(3) The data count of writable characters to be stored should be 72 bytes.
* When writable character 42 is designated, the width and height of the character are both
24 dots.
- 205 -