B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

(9) RFID setting
• RFID module type selection
• RFID tag type selection
• RFID error tag detection
• Max. number of RFID issue retries
• Max. number of RFID read retries
• RFID read retry timeout
• Max. number of RFID write retries
• RFID write retry timeout
• RFID adjustment for retry
• RFID radio output power level setting
• RFID AGC threshold setting
• RFID channel setting
• Q value setting
• AGC threshold for data write
• AGC threshold lower limit for retry
RFID module’s destination code setting
Password to protect error tag detection
Access password setting
Automatic unlock function setting
(10) Initial values after RAM clear
• Initial values after maintenance counter clear
Parameter
Initial Value
Label distance covered
0 km
Printed distance
0 km
Cut count 0
Head up/down count 0
Ribbon motor drive time
0 hour
Head-up solenoid drive time
0 hour
RS-232C hardware error count 0
System error count 0
Momentary power interruption count 0
• Initial values after parameter clear
Parameter
Feed fine adjustment (PC)
Cut position (or strip position) fine adjustment
(PC)
Back feed fine adjustment (PC)
Print density fine adjustment
(Thermal transfer print mode) (PC)
Print density fine adjustment
(Direct thermal print mode) (PC)
Ribbon motor drive voltage fine adjustment
(Rewind)
(PC)
Ribbon motor drive voltage fine adjustment
(Back tension) (PC)
Feed fine adjustment (Key)
Cut position (or strip position) fine adjustment
(Key)
Back feed fine adjustment (Key)
Print density fine adjustment
(Thermal transfer print mode) (Key)
Initial Value
0 mm
0 mm
0 mm
0
0
0
0
0 mm
0 mm
0 mm
0
- 26 -