28.06.2015 Views

B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

In case that the size of BASIC file storage area is set to “AA”:<br />

(9) When this command is received, the BASIC file storage area is reserved and the<br />

other areas in flash ROM on the CPU board are cleared.<br />

(10) If this command is not sent, the storage area in flash ROM on the CPU board<br />

cannot be used.<br />

If “AA” is set for the size of the BASIC file storage area with the BASIC file storage<br />

area being unallocated, the BASIC file storage area remains unallocated.<br />

(11) The storage areas except for the BASIC file storage area are allocated in the<br />

following order of precedence – the TrueType font storage area, and the bit map<br />

writable character storage area. After these storage areas are allocated, the<br />

remaining area is used for the PC save area.<br />

(12) If the sum of the TrueType font storage area and the bit map writable character<br />

storage area, specified by this command, is the size of ‘896 KB minus the BASIC<br />

file storage area size’, the TrueType font storage area and the bit map writable<br />

character storage area are allocated as specified. In this case, however, there is<br />

no PC save area.<br />

(13) If the sum of TrueType font storage area and the bit map writable character<br />

storage area, specified by this command, exceeds the size of ‘896 KB minus the<br />

BASIC file storage area size’, the TrueType font storage area is allocated as<br />

specified with the highest priority. Then, the remaining area is allocated to the bit<br />

map writable character storage area. There is no PC save area.<br />

(14) When “00” (0 KB) is specified for each of the TrueType font storage area and the<br />

bit map writable character storage area, the storage area is not allocated.<br />

(15) If the size of ‘896 KB minus the BASIC file storage area size’ or more is specified<br />

for either the TrueType font storage area or the bit map writable character storage<br />

area, each area other than the BASIC file storage area is allocated as specified.<br />

For example, when setting “10” or “11” for the size of the TrueType font storage<br />

area while the BASIC file storage area secures “4” (256KB), the entire storage<br />

areas except the BASIC file storage area are allocated to the TrueType font<br />

storage area. There is no bit map writable character storage area or PC save<br />

area.<br />

Refer to<br />

Example<br />

• Bit Map Writable Character Command ([ESC] XD)<br />

• Save Start Command ([ESC] XO)<br />

• Flash Memory Format Command ([ESC] J1)<br />

• 2-byte Writable Character Code Range Command ([ESC] XE)<br />

The TrueType font storage area and bit map writable character storage area are set to<br />

640 KB and 192 KB, respectively.<br />

(PC save area: 896 KB - 640KB - 192 KB = 64 KB)<br />

[ESC] XF; 10, 03, 00 [LF] [NUL]<br />

- 192 -

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!