28.06.2015 Views

B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Parameter<br />

LAN enable/disable setting<br />

XML specification setting<br />

Z-MODE enable/disable setting<br />

Initial Value<br />

OFF<br />

STD (V4.4A and Xx.x only)<br />

OFF (C5.3 or greater, Cx.x only)<br />

• The total label distance covered, sensor adjustment values (system mode ), IP address<br />

setting, socket communication number setting, and data of flash memory (flash memory card,<br />

ATA card, and flash ROM on the CPU board) are not cleared by RAM clear.<br />

• Number of successful RFID write and number of failure in RFID write are not cleared by RAM<br />

clear.<br />

• System password setting cannot be cleared by RAM clear.<br />

• For the all B-SX704-RFID-U2 series models regardless of the destination, the RFID radio<br />

output power level setting is initialized to 18, as the country data is also cleared by RAM clear.<br />

• RFID module’s destination code setting, password setting to protect error tag detection,<br />

access password setting, and automatic unlock function setting are not cleared by RAM clear.<br />

(The values in the table are the factory default.)<br />

4.2 ONLINE MODE FUNCTIONS<br />

The online mode provides the following functions for issuing labels and setting the threshold.<br />

(For details, refer to Key Operation Specification (TAA-1379).)<br />

(1) Issuing labels (by external equipment interface commands)<br />

(2) Paper feed (by the [FEED] key)<br />

(3) Pause (Halts issuing labels by the [PAUSE] key)<br />

(4) Restart (Reissues labels by the [RESTART] key after halting issuing labels or after the occurrence<br />

of an error.)<br />

(5) Reset (Enters an usual initial state which is obtained after the power is turned on, using the<br />

[RESTART] key.)<br />

(6) Error indication<br />

(7) Threshold setting<br />

(8) Various parameters settings<br />

(9) Various fine adjustments setting<br />

(10) Dumping of receive buffer<br />

4.3 DOWNLOAD MODE SETTING FUNCTION<br />

When the power is turned on by pressing the [FEED], [PAUSE], and [RESTART] keys at the same<br />

time, the printer enters the download mode. Therefore, the usual operations cannot be performed.<br />

For details, refer to the Key Operation Specification (TAA-1379).<br />

- 29 -

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!