B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

6.3.6 CLEAR AREA COMMAND [ESC] XR
Function
Format
Clears the designated area or reverses the white/black dot pattern in the designated
area in the drawing area.
[ESC] XR; aaaa, bbbb, cccc, dddd, e [LF] [NUL]
Term aaaa: Designated area start point X-coordinate
Fixed as 4 digits (in 0.1 mm units)
bbbb:
cccc:
dddd:
Designated area start point Y-coordinate
4 or 5 digits (in 0.1 mm units)
Designated area end point X-coordinate
Fixed as 4 digits (in 0.1 mm units)
Designated area end point Y-coordinate
4 or 5 digits (in 0.1 mm units)
e: Type of clear
A: Clears the contents in the designated area to zeros.
B: Reverses the white/black dot pattern in the designated area.
Explanation
Origin of
coordinates
(0, 0)
Backing paper
Label
Backing paper
Label
Start point
End point
Effective
print length
End point
Effective
print length
Start point
0
X
Effective
print width
Y
Effective
print width
Origin of
coordinates
(0, 0)
Y
Paper feed direction
X
0
Paper feed direction
[Print direction: Printing bottom first]
[Print direction: Printing top first]
Notes (1) The result is the same even if the start and end point coordinates are reversed.
(2) The result is the same even if the start and end point coordinates are set to an
upper right and a lower left points, respectively.
(3) The start and end point coordinates of the designated area must be set within the
effective print area set by the Label Size Set Command ([ESC] D).
- 54 -