B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

[C: Batch mode (Cut interval: 1, Issue count: 2)]
• “Automatic forward feed standby” is set to OFF in the system mode.
• The rotary cutter is used.
Cut position
Head position
(1) Idling (at the home position)
A
(2) Completes printing the 1st label (A).
A
B
(3) Starts printing the 2nd label (B).
A
B
B
(4) The 1st label (A) reaches the cut position
and is cut.
(5) Completes printing the 2nd label (B).
B
(6) Feeds the 2nd label (B) to the cut position.
B
(7) The 2nd label (B) reaches the cut position
and is cut.
(8) Since non-stop cutting is performed, paper
is fed and stopped over the cut position.
(9) Feeds back to the home position.
- 169 -