B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

(11) Writable character set: 44 (48×48 dots)
Character width 48 dots
Nibble mode
1 30H 2 30H 3 30H 4 30H 5 30H 6 30H
Character
height
48 dots
7 30H 8 30H 9 30H 10 30H
•
•
•
•
• 569 30H 570 30H
571 30H 572 30H 573 30H 574 30H 575 30H 576 30H
Nibble mode
1 00H 2 00H 3 00H 4 00H 5 00H 6 00H
7 00H 8 00H 9 07H 10 E0H
•
•
•
•
• 281 00H 282 00H
283 00H 284 00H 285 00H 286 00H 287 00H 288 00H
4
4 4
4
4
4
4
4
4
4
4
4
8
8
8
8
8
8
[Nibble mode]
(1) The writable character data to be stored is separated into four dot units and sent in the
following order (1 → 576). (High order digit: “3”)
(2) The data of writable characters to be stored is 30H to 3FH.
(3) The data count of writable characters to be stored should be 576 bytes.
[Hex. mode]
(1) The writable character data to be stored is separated into eight dot units and sent in
the following order (1 → 288).
(2) The data of writable characters to be stored is 00H to FFH.
(3) The data count of writable characters to be stored should be 288 bytes.
* When writable character 44 is designated, the width and height of the character are both 48
dots.
- 207 -