B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

(8) Writable character set: 41 (16×16 dots )
Character width 16 dots
Nibble mode
1 30H 2 30H 3 30H 4 30H
Character
height
16 dots
5 30H 6 31H 7 38H
•
•
•
58 31H 59 38H 60 30H
61 30H 62 30H 63 30H 64 30H
4
4
4
4
Hex. mode
8
8
1 00H 2 00H 3 01H 4 80H
5 01H 6 80H 7 01H
•
•
•
26 80H 27 01H 28 80H
29 01H 30 80H 31 00H 32 00H
[Nibble mode]
(1) The writable character data to be stored is separated into four dot units and sent in the
following order (1 → 64). (High order digit: “3”)
(2) The data of writable characters to be stored is 30H to 3FH.
(3) The data count of writable characters to be stored should be 64 bytes.
[Hex. mode]
(1) The writable character data to be stored is separated into eight dot units and sent in
the following order (1 → 32).
(2) The data of writable characters to be stored is 00H to FFH.
(3) The data count of writable characters to be stored should be 32 bytes.
* When writable character 41 is designated, the width and height of the character are both 16
dots.
- 204 -