B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

LCD Messages Printer Status Output Signal
of Upper Line (English) Busy Select nFault PError
EEPROM ERROR An EEPROM for back-up cannot be
H L L L
read/written properly.
SYSTEM ERROR (a) A command has been fetched from an H L L L
odd address.
(b) Word data has been accessed from a
place other than the boundary of the word
data.
(c) Long word data has been accessed from
a place other than the boundary of the
long word data.
(d) An undefined command in a place other
than the delay slot has been decoded.
(e) An undefined command in the delay slot
has been decoded.
(f) A command which rewrites the data in the
delay slot has been decoded.
RFID WRITE ERROR Writing data onto the RFID tag continuously H L L L
failed for the maximum number of RFID write
retries.
RFID ERROR
The printer cannot communicate with the H L L L
RFID module.
INPUT PASSWORD The printer is waiting for a password to be H L L L
entered.
PASSWORD INVALID Password entered was not correct H L L L
consecutively for three times.
RFID CONFIG ERR B-SX704-RFID-U2-US-R only
H L L L
RFID module’s destination code is not
specified
9.3 E-MAIL
The printer can notify the PC of the printer status by e-mail. The status to be notified by e-mail is the
same as the status which is notified through the serial interface. For details, refer to the Network
Specification (TAA-1401).
- 273 -