B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

Print origin of
coordinates
Graphic
height
22 dots
Graphic width 19 dots
Nibble mode
1 30H 2 30H 3 33H 4 30H 5 30H 6 30H
7 30H 8 30H •
•
•
•
•
•
•
• 126 30H
127 33H 128 3FH 129 30H 130 30H 131 30H 132 30H
4 4 4 4 4 4
8 8
8
Hex. mode
1 00H 2 30H 3 00H
4 00H 5 38H
•
•
•
•
•
63 00H
64 3FH 65 00H 66 00H
[Nibble mode]
(1) The graphic data is separated into four dot units and sent in the following
order (1 → 132). (High order digit: “3”)
(2) The graphic data is 30H to 3FH.
(3) The minimum unit in the X direction is 8 dots. Dots with no data are
transmitted as data 0.
(4) The graphic data count must be as follows:
Graphic data count = {(No. of graphic width dots + 7)/8} × No. of graphic
height dots × 2
* The value in the brackets is rounded down to the nearest whole number.
[Hex. mode]
(1) The graphic data is separated into eight dot units and sent in the following
order (1 → 66).
(2) The graphic data is 00H to FFH.
(3) The minimum unit in the X direction is 8 dots. Dots with no data are
transmitted as data 0.
(4) The graphic data count must be as follows:
Graphic data count = {(No. of graphic width dots + 7)/8} × No. of graphic
height dots
* The value in the brackets is rounded down to the nearest whole number.
- 212 -