B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

[C: Batch (Cut)]
• “Automatic forward feed standby” is set to ON in the system mode.
• The swing cutter is used.
Cut position
Head position
(1) Place paper.
(2) Completes a feed.
(Completes feeding to the top of paper.)
(3) Feeds to the cut position.
(4) Cuts unnecessary paper.
(5) Feeds back to the home position.
(6) After 1 second, performs 13.7-mm automatic
forward feed.
[C: Batch (Cut)]
• “Automatic forward feed standby” is set to OFF in the system mode.
• The rotary cutter is used.
Cut position
Head position
(1) Place paper.
(2) Completes a feed.
(Completes feeding to the top of paper.)
(3) Feeds to the cut position.
(4) Cuts unnecessary paper.
(5) Since non-stop cutting is performed, paper is
fed and stopped over the cut position.
(6) Feed back to the home position.
- 182 -