28.06.2015 Views

B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

1-cell width<br />

1-cell width<br />

1-cell width<br />

When the 1-cell width is 0, a two-dimensional code is not drawn. However, the twodimensional<br />

code printed on the previous label is cleared.<br />

Selection of mode<br />

All codes including alphanumerics, symbols, and Kanji can be used in one QR code.<br />

Manual mode or automatic mode can be selected to perform the operation.<br />

Selection of model<br />

Model 1: Original specification<br />

Model 2: Extended specification which enhances the function of position correction<br />

and can contain a large amount of data.<br />

Mask number<br />

To be sure the QR code is read, it is preferable that white and black modules are<br />

arranged in this symbol in a balanced manner. This prevents the bit pattern<br />

“1011101”, which is characteristically seen in the position detecting pattern, from<br />

appearing in the symbol as much as possible.<br />

The mask number is 0 to 7. The pattern is determined by placing each masking<br />

pattern for the mask number upon the module pattern. When the mask number is set<br />

to 8, masking is not performed. When the parameter is omitted, the most appropriate<br />

mask number is automatically selected to perform masking.<br />

Connection setting<br />

For QR code, data can be divided into several codes. Even though there is only a<br />

narrow print space, the code can be entered in the space by dividing the code. The<br />

data can be divided into a max. of 16 codes. Parity data is obtained by XORing all<br />

input data in units of bytes before dividing. The input data is calculated based on<br />

shift JIS for Kanji, or on JIS 8 for others. Examples are shown below:<br />

“0123456789 ” is divided into “0123”, “4567”, and “89 ”.<br />

Code No. 1 No. of divided codes: 3 Parity data: 84 Data “0123”<br />

Code No. 2 No. of divided codes: 3 Parity data: 84 Data “4567”<br />

Code No. 3 No. of divided codes: 3 Parity data: 84 Data “89 ”<br />

* The parity data is the XORed value for “0123456789 ”.<br />

30 31 32 33 34 35 36 37 38 39 93 FA 96 7B = 85<br />

(18) Explanation for MaxiCode<br />

Connection setting<br />

For MaxiCode, data can be divided into a max. of 8 codes.<br />

- 134 -

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!