B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

More documents

Recommendations

Info

(12) MaxiCode data For mode 2 or 3: [ESC] RBaa; bbbbbbbbbcccdddeeeee --- eeeee [LF] [NUL] For mode 4 or 6: [ESC] RBaa; fffffffffggggg --- ggggg [LF] [NUL] bbbbbbbbb: Postal code Fixed as 9 digits • Mode 2: b1b2b3b4b5: Zip code Fixed as 5 digits (Numerics) b6b7b8b9: Zip code extension Fixed as 4 digits (Numerics) • Mode 3: b1b2b3b4b5b6: Zip code Fixed as 6 digits (Character “A” of code set) b7b8b9: Vacant Fixed as 3 digits (20H) ccc: Class of service Fixed as 3 digits (Numerics) ddd: Country code Fixed as 3 digits (Numerics) eee --- eee: Message data strings 84 digits fffffffff: Primary message data strings 9 digits ggg --- ggg: Secondary message data strings 84 digits NOTES: 1. When anything other than numerics is included in the data string of zip code (mode 2), zip code extension, class of service, or country code, a MaxiCode is not drawn. 2. If the message data is less than 84 digits when mode 2 or 3 is selected, the printer adds a CR (000000) at the end of the data, and the remaining digits will be padded with FSs (011100). When message data exceeding 84 digits is received, the excess data will be discarded before drawing a MaxiCode. 3. If the message data is less than 93 digits (9 digits + 84 digits) when mode 4 or 6 is selected, the printer adds a CR (000000) at the end of the data, and the remaining digits will be padded with FSs (011100). When message data exceeding 93 digits is received, the excess data will be discarded before drawing a MaxiCode. 4. Mode 6 should not be used for usual operation since it is used for scanner programming. 5. When “TYPE2: Special specification” is set for MaxiCode specification setting in the system mode and when Mode 2 is selected, the country code must be 840. Otherwise, a MaxiCode will not be printed. 6. When “TYPE2: Special specification” is set for MaxiCode specification setting in the system mode and when Mode 3 is selected, the country code must be other than 840. Otherwise, a MaxiCode will not be printed. - 160 -
Examples (1) Origin (0, 0) Effective print area 12.5 mm 15.0 mm 55.0 mm 20.0 mm 63.0 mm 15.0 mm [ESC] C [LF] [NUL] [ESC] XB01; 0200, 0125, 3, 1, 02, 02, 06, 06, 02, 0, 0150 [LF] [NUL] [ESC] XB02; 0830, 0550, 3, 1, 02, 04, 07, 08, 04, 3, 0150, +0000000000, 1, 00, N [LF] [NUL] [ESC] RB01; 12345 [LF] [NUL] [ESC] RB02; * ABC * [LF] [NUL] [ESC] XS; I, 0002, 0002C3000 [LF] [NUL] - 161 -
Page 1 and 2:
TOSHIBA Bar Code Printer B-SX4T Ser
Page 3 and 4:
Page 6.3.21 2-BYTE WRITABLE CHARACT
Page 5 and 6:
1. SCOPE This specification applies
Page 7 and 8:
Boot program Main program V1.0 V1.1
Page 9 and 10:
The model configuration and the dif
Page 11 and 12:
Available PCMCIA cards • LAN card
Page 13 and 14:
(13) Transmission Control: XON/XOFF
Page 15 and 16:
(14) Input/Output Signals Printer F
Page 17 and 18:
3.2 PARALLEL INTERFACE (1) Type: Ce
Page 19 and 20:
(9) Connector Pin Diagram (IEEE1284
Page 21 and 22:
nInit (Printer ← Host) • Reset
Page 23 and 24:
ECP mode Data 1 ~ 8 (Printer ←
Page 25 and 26:
Receiving data in the Compatibility
Page 27 and 28:
3.3 USB INTERFACE (1) Standard: Con
Page 29 and 30:
(3) Various parameters settings •
Page 31 and 32:
Parameter Initial Value Print densi
Page 33 and 34:
Parameter LAN enable/disable settin
Page 35 and 36:
(2) Storing PC interface commands P
Page 37 and 38:
(2) Where the Saved Data Call Comma
Page 39 and 40:
6.2 LIST OF COMMANDS (1) Commands r
Page 41 and 42:
6.3 COMMANDS FOR CREATING APPLICATI
Page 43 and 44:
[mm] Model B-SX4T B-SX5T Item Issue
Page 45 and 46:
Notes (1) Before changing the label
Page 47 and 48:
6.3.2 POSITION FINE ADJUST COMMAND
Page 49 and 50:
[Strip Position Fine Adjustment] 0.
Page 51 and 52:
NOTES: 1. If the head is being lift
Page 53 and 54:
(7) Procedure for label having less
Page 55 and 56:
6.3.3 PRINT DENSITY FINE ADJUST COM
Page 57 and 58:
6.3.5 IMAGE BUFFER CLEAR COMMAND [E
Page 59 and 60:
[Effective print area] [mm] Model B
Page 61 and 62:
[Line] (1) Horizontal line (In the
Page 63 and 64:
(4) Programming the radius of the r
Page 65 and 66:
N: Letter Gothic (Medium) 14.3 poin
Page 67 and 68:
noooooooooo: Increment and decremen
Page 69 and 70:
[Effective print area] [mm] Model B
Page 71 and 72:
q: Gothic725 Black : r: Chinese (24
Page 73 and 74:
(10) Increment/decrement Printing i
Page 75 and 76:
(14) Link field No. The link field
Page 77 and 78:
(3) The Bit Map Font Format Command
Page 79 and 80:
(2) Origin (0, 0) 30.0 mm Effective
Page 81 and 82:
6.3.9 OUTLINE FONT FORMAT COMMAND [
Page 83 and 84:
Po: Alignment (Omissible. If omitte
Page 85 and 86:
g: Drive Indicates where the TrueTy
Page 87 and 88:
[Effective print area] [mm] Item Mo
Page 89 and 90:
F: Price font 2 (POP font) G: Price
Page 91 and 92:
(6) Rotational angles of a characte
Page 93 and 94:
(13) Link field No. The link field
Page 95 and 96:
(4) When the drawing data is change
Page 97 and 98:
(2) Origin (0, 0) 30.0 mm Effective
Page 99 and 100:
e: Type of check digit 1: Without a
Page 101 and 102:
In the case of MSI, Interleaved 2 o
Page 103 and 104:
In the case of GS1 DataBar Format
Page 105 and 106:
In the case of Data Matrix (Two-dim
Page 107 and 108:
In the case of PDF417 (Two-dimensio
Page 109 and 110:
The maximum number of columns and r
Page 111 and 112:
In the case of MaxiCode Code (Two-d
Page 113 and 114: In the case of RFID (Data write) Fu
Page 115 and 116: can be designated by the parameters
Page 117 and 118: This parameter is effective only fo
Page 119 and 120: In the case of RFID (Data read) Fun
Page 121 and 122: Explanation (1) The parameter, “N
Page 123 and 124: (3) Type of bar code 0: JAN8, EAN8
Page 125 and 126: : GS1 DataBar family GS1 DataBar Om
Page 127 and 128: In the case of QR code 1-cell width
Page 129 and 130: [GS1 DataBar Limited] Height [GS1 D
Page 131 and 132: (11) Increment/decrement Printing i
Page 133 and 134: [Data Command] [ESC] RB; A [LF] B [
Page 135 and 136: Cell size and the effective data ca
Page 137 and 138: (16) Explanation for the PDF417 and
Page 139 and 140: (19) Explanation for CP code ECC (
Page 141 and 142: Designation of access password regi
Page 143 and 144: (3) More than one Bar Code Format C
Page 145 and 146: (2) Origin (0, 0) 30.0 mm Effective
Page 147 and 148: 6.3.11 BIT MAP FONT DATA COMMAND [E
Page 149 and 150: Examples (1) Origin (0, 0) Effectiv
Page 151 and 152: (3) Origin (0, 0) 30.0 mm 12.5 mm E
Page 153 and 154: Examples (1) Origin (0, 0) Effectiv
Page 155 and 156: 6.3.13 BAR CODE DATA COMMAND [ESC]
Page 157 and 158: Symbol size Row Col ECC200 Numeric
Page 159 and 160: The maximum number of columns and r
Page 161 and 162: (4) CODE128 code selection check Ch
Page 163: (10) Transfer code for QR code 0 1
Page 167 and 168: (3) Origin (0, 0) 12.5 mm Effective
Page 169 and 170: Explanation (1) Number of labels to
Page 171 and 172: [C: Batch mode (Cut interval: 1, Is
Page 173 and 174: [C: Batch mode (Cut interval: 1, Is
Page 175 and 176: [D: Strip mode (Issue count: 3)] St
Page 177 and 178: The expansion I/O is not installed:
Page 179 and 180: Correction for the ribbon saving ar
Page 181 and 182: Mirror printing bottom first Backin
Page 183 and 184: Notes Explanation of processes inv
Page 185 and 186: Transmissive sensor (when using pre
Page 187 and 188: [C: Batch (Cut)] • “Automatic f
Page 189 and 190: (4) Feed speed • A feed is perfor
Page 191 and 192: 6.3.16 EJECT COMMAND [ESC] IB Funct
Page 193 and 194: 6.3.17 FORWARD/REVERSE FEED COMMAND
Page 195 and 196: 6.3.18 STORAGE AREA ALLOCATE COMMAN
Page 197 and 198: • For the firmware V5.0 or greate
Page 199 and 200: 6.3.19 FLASH MEMORY FORMAT COMMAND
Page 201 and 202: 6.3.21 2-BYTE WRITABLE CHARACTER CO
Page 203 and 204: 6.3.23 BIT MAP WRITABLE CHARACTER C
Page 205 and 206: 1-byte writable character W/C = Wri
Page 207 and 208: [Nibble mode] (1) The writable char
Page 209 and 210: (9) Writable character set: 42 (24
Page 211 and 212: (11) Writable character set: 44 (48
Page 213 and 214: Examples Writable character set: 03
Page 215 and 216:
ffff: Data count (Effective only fo
Page 217 and 218:
[When TOPIX compression mode is sel
Page 219 and 220:
Notes (1) The print origin of coord
Page 221 and 222:
[TOPIX compression mode] 10.0 mm 24
Page 223 and 224:
6.3.26 SAVE START COMMAND (For ATA
Page 225 and 226:
6.3.28 SAVED DATA CALL COMMAND (For
Page 227 and 228:
6.3.30 HEAD BROKEN DOTS CHECK COMMA
Page 229 and 230:
Examples Load paper. Feed one lab
Page 231 and 232:
6.3.33 STATUS REQUEST COMMAND [ESC]
Page 233 and 234:
6.3.35 VERSION INFORMATION ACQUIRE
Page 235 and 236:
C: Stored PC command save file SOH
Page 237 and 238:
6.3.38 PRINTER OPTION STATUS ACQUIR
Page 239 and 240:
6.3.40 SOCKET COMMUNICATION PORT SE
Page 241 and 242:
6.3.42 PASS-THROUGH COMMAND [ESC] @
Page 243 and 244:
6.4 COMMANDS FOR SYSTEM ADMINISTRAT
Page 245 and 246:
oo: 1st byte code of the control co
Page 247 and 248:
6.4.2 FINE ADJUSTMENT VALUE SET COM
Page 249 and 250:
6.4.3 RFID PARAMETER SET COMMAND [E
Page 251 and 252:
6.4.4 BATCH RESET COMMAND [ESC] Z0
Page 253 and 254:
When print data for several labels
Page 255 and 256:
Xfgggggggg: User block access passw
Page 257 and 258:
Example Examples of the status to b
Page 259 and 260:
6.5.4 RFID DATA WRITE COMMAND [ESC]
Page 261 and 262:
20 Unlocked Unlocked Locked Unlocke
Page 263 and 264:
Qqrstuvw: Area lock designation (Ef
Page 265 and 266:
7. CONTROL CODE SELECTION (1) Autom
Page 267 and 268:
(2) Cutter Error • Rotary cutter
Page 269 and 270:
8.3 ERRORS IN WRITABLE CHARACTER AN
Page 271 and 272:
9. STATUS RESPONSE 9.1 FUNCTIONS Th
Page 273 and 274:
9.1.2 DETAIL STATUS LCD Message of
Page 275 and 276:
9.1.3 SUMMARY OF STATUS RESPONSE In
Page 277 and 278:
LCD Messages Printer Status Output
Page 279 and 280:
No. LCD Messages of Upper line (Eng
Page 281 and 282:
NOTE 3: ◦: ON : Blinking •: OFF
Page 283 and 284:
No. DUTCH No. SPANISH No. JAPANESE
Page 285 and 286:
12. CHARACTER CODE TABLE The follow
Page 287 and 288:
(5) PC-851 0 1 2 3 4 5 6 7 8 9 A B
Page 289 and 290:
(9) PC-1252 0 1 2 3 4 5 6 7 8 9 A B
Page 291 and 292:
(13) LATIN9 0 1 2 3 4 5 6 7 8 9 A B
Page 293 and 294:
(3) PC-852 0 1 2 3 4 5 6 7 8 9 A B
Page 295 and 296:
(7) LATIN9 0 1 2 3 4 5 6 7 8 9 A B
Page 297 and 298:
(2) PC-8 B-SX4T 0 1 2 3 4 5 6 7 8
Page 299 and 300:
(4) PC-851, PC-855, PC-1250, PC-125
Page 301 and 302:
(6) PC-1253 B-SX4T 0 1 2 3 4 5 6 7
Page 303 and 304:
12.4 OCR-B (Bit map font type: T) (
Page 305 and 306:
(3) PC-852 B-SX4T 0 1 2 3 4 5 6 7
Page 307 and 308:
(5) PC-1252, PC-1254, LATIN9 B-SX4
Page 309 and 310:
12.5 TEC OUTLINE FONT 1 (Outline fo
Page 311 and 312:
(5) PC-851 0 1 2 3 4 5 6 7 8 9 A B
Page 313 and 314:
(9) PC-1252 0 1 2 3 4 5 6 7 8 9 A B
Page 315 and 316:
(13) LATIN9 0 1 2 3 4 5 6 7 8 9 A B
Page 317 and 318:
12.7 TEC OUTLINE FONT 2, 3, GOTHIC7
Page 319 and 320:
(5) PC-851 0 1 2 3 4 5 6 7 8 9 A B
Page 321 and 322:
(9) PC-1252 0 1 2 3 4 5 6 7 8 9 A B
Page 323 and 324:
(13) LATIN9 0 1 2 3 4 5 6 7 8 9 A B
Page 325 and 326:
(2) GB18030 code tables TBD - 321 -
Page 327 and 328:
TBD - 323 -
Page 329 and 330:
12.9 TrueType FONT (1) PC-850 (2) P
Page 331 and 332:
(5) PC-851 (6) PC-855 - 327 -
Page 333 and 334:
(9) PC-1252 (10) PC-1253 - 329 -
Page 335 and 336:
(13) LATIN9 2 3 4 5 6 7 8 9 A B C D
Page 337 and 338:
- 333 -
Page 339 and 340:
- 335 -
Page 341 and 342:
- 337 -
Page 343 and 344:
- 339 -
Page 345 and 346:
- 341 -
Page 347 and 348:
- 343 -
Page 349 and 350:
- 345 -
Page 351 and 352:
- 347 -
Page 353 and 354:
- 349 -
Page 355 and 356:
- 351 -
Page 357 and 358:
- 353 -
Page 359 and 360:
- 355 -
Page 361 and 362:
(4) NW-7 2 3 4 5 6 7 0 SP 0 1 1 A a
Page 363 and 364:
Value Code Table VALUE CODE A CODE
Page 365 and 366:
(8) PDF417 The following modes are
Page 367 and 368:
(10) QR code When manual mode is se
Page 369 and 370:
(11) Postal code Customer bar code
Page 371 and 372:
How to send control code data: SOH
Page 373 and 374:
(14) GS1 DataBar Expanded/GS1 DataB
Page 375 and 376:
(15) RFID [Transfer Code] 0 1 2 3 4
Page 377 and 378:
Type of Bar Code: JAN13, EAN13 (1)
Page 379 and 380:
Type of Bar Code: UPC-E (1) No affi
Page 381 and 382:
Type of Bar Code: JAN8 + 5 digits,
Page 383 and 384:
Type of Bar Code: JAN13 + 5 digits,
Page 385 and 386:
Type of Bar Code: UPC-A + 5 digits
Page 387 and 388:
Type of Bar Code: UPC-E + 5 digits
Page 389 and 390:
Type of Bar Code: Interleaved 2 of
Page 391 and 392:
Type of Bar Code: CODE39 (Standard)
Page 393 and 394:
Type of Bar Code: No auto selection
Page 395 and 396:
Type of Bar Code: POSTNET (1) Auto
Page 397 and 398:
15. AUTOMATIC ADDING OF START/STOP
show all

B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

Create successful ePaper yourself

Delete template?

Save as template?