B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

Parameter
Initial Value
Centronics operation mode
SPP
Plug-and-play operation mode
OFF
Label end/ribbon end process setting
TYPE1
Pre-peel-off process setting
OFF
Back feed speed
3”/sec
MaxiCode specification setting
TYPE1
Print head type setting B-SX4
V2 type: TPH104R7
B-SX5
V2 type: TPH128R5
Status response
ON
Label pitch
76.2 mm
Effective print length
74.2 mm
Effective print width B-SX4 104.0 mm
B-SX5
128.0 mm
Print method
Thermal transfer print mode
Type of sensor
Transmissive sensor
Feed speed B-SX4 6”/sec
B-SX5
5”/sec
Issue mode
Batch
PC save automatic call
ON
Save No. on the CPU board (ID) 01
BASIC interpreter setting
BASIC interpreter trace setting
DHCP setting
RFID module type selection
RFID tag type selection
RFID module’s destination code setting
RFID error tag detection
OFF
OFF
OFF
None
None
Depends on the module setting.
OFF
Password to protect error tag detection OFF: 0000
Access password setting 00000000
Automatic unlock function setting
Max. number of RFID issue retries 3
Max. number of RFID read retries 5
RFID read retry timeout
OFF
4.0 sec.
Max. number of RFID write retries 5
RFID write retry timeout
RFID adjustment for retry
2.0 sec.
Invalid: 0 mm
RFID radio output power level setting B-9704-RFID-U1: 251
B-SX704-RFID-U2: 18
B-9704-RFID-U1-EU-R: 50
B-SX704-RFID-U2-EU/US/CN/AU-R: 18
RFID AGC threshold setting 0
RFID channel setting
AUTO
Q value 0
AGC threshold for data write 0
AGC threshold lower limit for retry 0
Hibiki tag multi-word write
0: OFF
Number of times RFID write succeeded 0
Number of times RFID write failed 0
System mode password operation setting
OFF
- 28 -