B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

when “0” (Verification disabled) is selected.
Bnn:
Designates the area where the data is written (Omissible)
00: Blank0 (Reserved area)
01: Blank1 (EPC area) (When omitted)
02: Blank2 (TID area)
03: Blank3 (User area)
04: Bank4 (User block 1)
05: Bank5 (User block 2)
06: Bank6 (User block 3)
07: Bank7 (User block 4)
08: Bank8 (User block 5)
(Effective only when the Hibiki tag is
used for the B-SX704-RFID-U2-R.)
This parameter is effective only for EPC Class1 Generation 2 tag type. The
area where data can be written differs depending on tag types.
When a format is designated, this parameter is ignored.
When the RFID module type is the U1, the EPC area and user area are
effective.
Hopppppppp: User block password setting (Effective only when the Hibiki tag is used
for the B-SX704-RFID-U2-R.)
Designates a password to lock certain user blocks.
Up to five user blocks can be specified continuously.
For example: H4AABBCCDD,H5BBCCDDEE,H6CCDDEEFF
o: Designates a user area bank (4 to 8)
4: Bank4 (User block 1)
5: Bank5 (User block 2)
6: Bank6 (User block 3)
7: Bank7 (User block 4)
8: Bank8 (User block 5)
pppppppp: User block password
Fixed to 8-digit hexadecimal number
00000000 to FFFFFFFF
- 258 -