B-SX4T Series, B-SX5T Series External ... - Toshiba Tec Italia

No.
LCD Messages of
Upper line
LED Indication
(English) POWER ON LINE ERROR
Printer Status
25 RFID WRITE ERROR ◦ • ◦ Writing data onto the RFID tag
continuously failed for the
maximum number of RFID write
retries.
26 RFID ERROR ◦ • ◦ The printer cannot communicate
with the RFID module.
27 INPUT PASSWORD ◦ • • The printer is waiting for a
password to be entered.
28 PASSWORD INVALID ◦ • • Password entered was not
correct consecutively for
three times.
29 RFID CONFIG ERR ◦ • • B-SX704-RFID-U2-US-R
only
RFID module’s destination
code is not specified.
Restoration
by the
[RESTART]
key
Yes/No
Yes
No
No
No
No
Acceptance
of Status
Request
Reset
Command
Yes/No
Yes
Yes
No
No
No
NOTE 1: When a command error is found in the command sent, 16 bytes of the command code of the
error command are displayed on the upper line of the LCD. (However, [LF] and [NUL] are
not displayed.)
[Example 1]
[ESC] PC001; 0A00, 0300, 2, 2, A, 00, B [LF] [NUL]
Command error
LCD display
PC001;0A00,0300,
B-SX4T V1.0A
[Example 2]
[ESC] T20 G30 [LF] [NUL]
Command error
LCD display
T20G30
B-SX4T
V1.0A
[Example 3]
[ESC] XR; 0200, 0300, 0450, 1200, 1 [LF] [NUL]
Command error
LCD display
XR;0200,0300,045
B-SX4T V1.0A
NOTE 2: When the command error is displayed, “? (3FH)” is displayed for codes other than 20H to 7FH
and A0H to DFH.
- 276 -