OVERHEAD LINE SPLICES

DISTRIBUTION CONNECTORSGENERAL USEIN-SPAN PHASE CONNECTOR AND HOUSINGSECTION DDALUMINUMGM128This in-span phase connector is designed for use on openwire or multiple cable secondaries to permit aestheticreadily accessible service connections.The connector body is constructed of high strength aluminumfor optimum corrosion resistance and light weight.The housing or case provides protective insulation from adjacentconductors and is formed for accessibility and easeof application. Secondary run and service tap openings arepre-cut for alignment and tap conductor insertion orremoval.The connector locks in position inside the case providingone piece for assembly.For best performance, the connectors are supplied withFargolene ® Inhibitor protected grooves and are individuallypackaged in plastic bags.DD12The Fargo GM128AKL makes an insulated phase connectorsystem for up to four service taps and may be used with theFargo neutral span clamps.CATALOGNUMBERGM128AL(Connector Only)GM128AKL(Connector and Housing)RANGE APPROX. OVERALL DIMENSIONS INCHES WEIGHTLBSRUN TAP LENGTH (MM) WIDTH (MM) HEIGHT (MM) (KG)2 Str. – 350 KCMIL 4 Sol. – 3/0 Str.2 Str. – 350 KCMIL 4 Sol. – 3/0 Str.3 5/16(84.03)3 13/16(97.03)2 5/8(66.81)3 1/4(82.71)2(50.90)3(76.35)1.04(.47)1.20(.54)DD-12HUBBELL ® Power Systems January 2013