OVERHEAD LINE SPLICES

OVERHEAD PRIMARY TAPSHOT LINE TAP CLAMPSALUMINUMFor Aluminum, ACSR, and armor rod covered aluminum orACSR conductorALUMINUMAH/S1500For installation on energized conductorMaterial: Body and Keeper – Aluminum AlloyEyebolt – Bronze Alloy – Tin PlatedEyestem – Bronze Alloy, Forged or Stainless SteelSpring ( on eyestem) Stainless SteelFor Factory greased and bagged clamps, see notes belowtable.DC1DB-1* Replace Prefix “S” with “P” for factory greased and bagged part (i.e. P1534AGP).**Add “XB” Suffix for factory greased and bagged part (i.e. AH7GPXB).#RUS Listed+ Aluminum/Copper bimetallic washer in eyebolt.FIGURE 1 FIGURE 2Product Data & Conductor SizeCONDUCTOR RANGE (AWG OR KCMIL)MAINDIMENSIONSINCHES (MM)TAP NUTCATALOGNUMBERMAINLINE TAPFIG.NO. PLATING AACAAC WITHA/R ACSRACSRWITH A/R AAC/CU ACSR L H#8 Sol. – 2/0*S1520AA AL ALNone #8 – 2/0 Str n/a #8 – 1/0 n/a#8 – 1/0Str.1.0 5.251–––0.128 - 0.414–––(25.4) (133)*S1520AGP AL AL/CU Tin plated(3.25 - 10.54)#8 – 556.5#6 Sol. –AH4** (#) AL ALNone #6 Sol – 600 #6 Str – 3/0 Str#6 – 3/0#6 – 4/0(18/1)266.81.75 7.751––– 0.157 - 0.905 –––––– 0.157 - 0.593 ––– (44) (196)AH4GP** (#) AL AL/CU Tin plated(4.00 - 23.03)(4.00 - 15.07)*S1530AA (#) AL ALNone#6 Str – 2/0 #6 – 397.5#6 Sol. – 4/0#6 Sol – 400#4 – 1/0#6 – 3/0*S1530AC (#) AL CU AC Trans*Str(18/1)Str1.75 7.13*S1530AGP AL AL/CU 2 Tin plated––– 0.162 - 0.745 ––––––0.162 - 0.547––– (44) (181)*S1534AGP AL AL/CU Tin plated(4.12 - 18.96)(4.12 - 13.92)*S1535AA AL ALNone #2 Sol – 450 #4 – 3/0 Str #4 – 397.5 #4 – 2/0 #4 Str. – 450 #8 – 397.51.50-––– 0.250 - 0.806 ––––––0.204 - 0.806–––*S1535AGP AL AL/CU Tin plated(38)(6.36 - 20.51)(5.19 - 20.51)*S1540AA (#) AL ALNone3/0 (6/1) –#4 Sol. – #6 –4/0 Str – 800 #4 Str – 4/0#4 – 266.8*S1540AC (#) AL CU 636 (30/19)350266.8 1.812AC Trans*––– 0.502 – 1.031 ––––––0.198 - 0.703––– (46)*S1540AGP AL AL/CU Tin plated(12.78 - 26.24)(5.03 - 17.89)3/0 (6/1) –#4 Sol. – #6 –AH7** (#) AL ALNone 4/0 Str – 800 #4 Str-4/0#4 – 266.8636 (30/19)350266.8 1.812––– 0.502 – 1.031 ––––––0.198 - 0.703––– (46)AH7GP** (#) AL AL/CU Tin plated(12.78 - 26.24)(5.03 - 17.89)266.8 – 556.5 (30/7) 266.8 – #4 Sol. – #6 –*S1545AA AL ALNone 700 Str – 1500715.5 – 1510 45/7 556.5300266.8 2.192––– 0.939 – 1.490 ––––––0.198 - 0.703––– (56)*S1545AGP AL AL/CU Tin plated(23.90 - 37.92)(5.03 - 17.89)(ACROSSFLATS)ANDERSON HUBBELL ® POWER SYSTEMS FARGO ® DECEMBER 2012TAP7.75(196)7.31(186)7.31(186)9.63(245)9/16(14.3)9/16(14.3)APPROX.WT.EACHLBS.(KG).0.4(0.18)0.8(0.36)11/16(17.5) 0.64(0.29)3/4(19)3/4(19)3/4(19)3/4(19)3/4(19)0.88(0.40)0.98(0.45)0.98(0.45)1.35(0.61)