OVERHEAD LINE SPLICES

BRONZEGC8000®ANDERSONPOWER SYSTEMS, INC.general usevise type PARALLEL GROOVEbronze• For copper to copper conductor -splice, loop deadend orservice entrance tapsU-102-9Material:Castings—Copper alloyHardware— Stainless steelGalvanized SteelSilicon BronzeSuffix Construction:“G” = Grommets — holds spacer during OH installs“O” = Torque Head Bolt“L” = Inhibitor Applied @ FactoryEx: GC8020GLO ConstructionCatalogNumber*Conductor RangeMax. Min. ASol. Str. Sol. (MM)Approx. Dimensions InchesB(MM)C(MM)BoltSIZEBoltHead(HEX)Wt lb(KG)GC8002 2 3 8 1 3/8(34.99)1 1/4(31.81)7/8(22.27)5/16(7.95)9/16(14.32).16(.07)GC8010 1/0 1 8 1 1/2(38.18)1 3/8(34.99)1(25.45)5/16(7.95)9/16(14.32).24(.11)GC8020 3/0 2/0 8 1 3/4(44.54)1 3/8(34.99)1 1/8(28.63)5/16(7.95)9/16(14.32).33(.15)GC8040** 4/0 4/0 6 2 3/8(60.44)1 1/2(38.18)1 1/2(38.18)3/8(9.54)9/16(14.32).62(.28)*For Tin Plated Connectors add Suffix “P” to the Catalog Number desired.**RUS ListedConductor RangeEach size will close on two of the maximum size conductors, one minimum and one maximum size, or combinations in between.Hot Stick InstallationAll connectors are available with flexible neoprene grommets to hold spacer bar in position so run and tap connectors may be installed withease. Grommets positioning spacer do not interfere with smooth operation of connector. If clamps are to be equipped with grommets, pleasespecify by adding suffix “G” to the catalog number.Inhibitor Protected and BaggedConnectors are available with Factory installed Fargolene inhibitor and individually packaged. When ordering add the Suffix “L” to catalognumber.HUBBELL – CENTRALIA, MISSOURIMARCH 2008