OVERHEAD LINE SPLICES

SECTION DEDISTRIBUTION CONNECTORSBRONZEBRSSUSPENSIONBOLTEDBRONZEFor use with copper or Copperweld ® cable.Through the use of these clamps hysteresis and eddycurrent power losses, are reduced to a minimum.Liners are not required.Material:Body—high tensile bronze alloyKeeper—electrical bronze*Hardware—galvanized steelSocket and Clevis—ductile iron,galvanizedCotter Pin—#302 stainless steelDE6CATALOGNUMBERBRS60NBRS60SBRS60CBRS83NBRS83SBRS83CBRS100NBRS100SBRS100CBRS118NBRS118SBRS118CTYPEFITTINGCAT. NO.CLAMPINGRANGEINCHES (MM)ULTIMATEBODYSTRENGTHLBS. ((KG)MAX. TAKE-OFF ANGLEo LDIMENSIONSINCHES (MM)W HNoneSocketClevisNoneSocketClevisNoneSocketClevisNoneSocketClevis—SA04CA04—SA06CA06—SA07CA10—SA11CA10.20-.60(5.08-15.24).40-.83(10.16-21.08).625-1.00(15.88-25.40).70-1.18(17.78-29.97)16,000(7,258)18,000(8,615)22,000(9,979)25,000(11,340)15˚15˚15˚20˚6-1/2(165.10)7-1/4(184.15)8(203.20)8(203.20)3/4(19.05)31/32(24.6)1-1/8(28.58)1-9/32(32.55)2-1/4(57.15)2-3/8(60.33)2-1/2(63.50)2-1/2(63.50)APPROX.WT. EACHLBS. (KG)2.9 (1.32)4.4 (1.90)4.5 (2.04)3.7 (1.68)5.0 (2.27)5.4 (2.45)4.5 (2.04)5.9 (2.68)6.3 (2.81)4.9 (2.22)NOTE: Recommended torque on U-bolts: 1/2”–480 in. lbs.* Bronze U-bolts, nuts and washers can be furnished by adding suffix “ED” to catalog number. Example, BRS60NED.DE-6July 2012HUBBELL ® Power Systems