OVERHEAD LINE SPLICES

TAMPERPROOF EQUIPMENT LOCKSLOCKSGM300Designed for semi-permanent single-use locking ofpower pedestals, equipment housings, truck/trailerdoors, etc.Locks available in torque screw and pressed pin design.Locks provide over 600 lb (272 Kg) pull strength.Locks may be removed with bolt cutters or hacksaw.GM305Material:Body - Extruded alluminuim alloyRing - Alumoweld ®Bolt - Aluminum - (shears @ 60 in-lb torque)Pin - Spring SteelABA B ABFigure 1 Figure 2Figure 3Figure 4Figure 5Ordering InformationCATALOGNUMBERFIGURENO.A(MM)B(MM)C(MM)RING WIRE SIZE(MM)FASTENER TYPEWT LB(KG)GM305 11”(25.45)2 1/4”(57.26)1/2(12.73)#6 (.162)(4.12)Torque Screw.06(.03)GM306 12”(50.90)3 1/4”(82.71)1/2(12.73)#6 (.162)(4.12)Torque Screw.07(.03)DI-12GM307 21”(25.45)2 1/4”(57.26)1/2(12.73)#6 (.162)(4.12)Torque Screw.06(.03)GM320 31”(25.45)2 1/2”(63.63)3/4(19.09)#4 (.204)(5.19)Torque Screw.12(.03)GM3203 31”(25.45)3 1/4”(82.71)3/4(19.09)#4 (.204)(5.19)Torque Screw.12(.03)GM321 41”(25.45)2 1/2”(63.63)3/4(19.09)#4 (.204)(5.19)Torque Screw.07(.03)GM322 51”(25.45)2 1/2”(63.63)3/4(19.09)#4 (.204)(5.19)Pressed Pin.11(.05)GM3223 51”(25.45)3 1/4”(82.71)3/4(19.09)#4 (.204)(5.19)Pressed Pin.12(.03)AUGUST 2012ANDERSON HUBBELL ® POWER SYSTEMS FARGO ®