OVERHEAD LINE SPLICES

VERSA-CRIMP® COPPER COMPRESSION TAPCOPPERVCUC• For use with VERSA-CRIMP ® types VC6 and VC7 seriestools, only.• For copper and copperweld conductors.• Copperweld conductors within the listed wire rangeof the concentric copper sizes are recommended.HMaterial:CopperDC28COPPER CONDUCTOR RANGEVERSA-CRIMPDIMENSIONSINCHES (MM)CATALOGNUMBERMAIN TAPTOOLTYPEL HVCUC33 #6 Sol–#2 Str. #6 Sol.–#2 Str.2-15/162-15/16VC6(74.61)(74.61)VCUC53 #2 Sol.–2/0 Str. #6 Sol.–#2 Str.(ALL)32-15/16VC7(76.2)(74.61)VCUC55 #2 Sol.–2/0 Str. #2 Sol.–2/0 Str.(ALL)33(76.2)(76.2)*VCUC63 1/0–4/0 Str. #6 Sol–#2 Str.2-15/163-3/16VC63(74.61)(80.96)*VCUC65 1/0-4/0 Str. #2 Sol.–2/0 Str.VC733-3/16VC6FT(76.2)(80.96)VC7FT*VCUC66 1/0–4/0 Str. 1/0–4/0 Str.*Not for use with VC6350, VC6L or VC6500 tools.COPPERVCRCProduct Data & Conductor Size3-3/16(80.96)3-3/16(80.96)VERSA-CRIMP® COPPER COMPRESSION GROUND CONNECTORHLAPPROX.WT. EACHLBS. (KG).40(.18).42(.19).44(.20).50(.23).54(.24).66(.30)• For use with VERSA-CRIMP ® Types VC6 and VC7 seriestools, only.• When using the VC6 tool, use threaded copperweldor threaded copper clad ground rods, only.• When using the VC7 tool, use threaded or unthreadedcopperweld or copper clad ground rods.LMaterial:CopperCATALOGNUMBER*VCRC66*VCRC86COPPER CONDUCTOR RANGEVERSA-CRIMPTOOLDIMENSIONSINCHES (MM)BARREL “U” GROOVE TYPEL H1/2” to 5/8” ground rods3-5/322-31/32(80.16)(74.61)3/4” ground rods*Not for use with VC6350, VC6L or VC6500 tools.Product Data & Conductor Size1/0-250 MCM Cu.368 -.574 CopperweldDECEMBER 2012ANDERSON HUBBELL ® POWER SYSTEMS FARGO ®VC6(ALL)VC7(ALL)3-5/32(80.16)3-3/32(78.59)APPROX.WT. EACHLBS. (KG).80(.36).95(.43)