OVERHEAD LINE SPLICES

More documents

Recommendations

Info

®ANDERSONPOWER SYSTEMS, INC.U-102-13DISTRIBUTION CONNECTORSALUMINUM LONG BARREL TERMINAL LUGS FORMOUNTING ON TOP OF TYPE AHL LUGSTYPE ATL STEPPED LUGALUMINUMATL• Offset heights and mounting pad dimensions allowATL-lugs to be stacked on top of AHL-lugs so thattwo conductors can be connected to each NEMAtwo hole position on a terminal spade or bus bar(see illustration below).• Rated for aluminum conductors at Code ampacities.• The same crimping dies install this series as usedon the AHL type. Connectors are prefilled withrubber compatible electrical joint compound andplugged.• For copper conductor, see type CSL.Material: AluminumNote: Add suffix “TP” to specify tin plating.CONDUCTOR RANGEDIMENSIONS INCHES (MM)CATALOGNUMBERCONCENTRIC &COMPRESSEDSTRANDRATING(1)DIAMETERRANGE-INCHES-COMMONCRIMPINGDIESB C F H LAPPROX.WT./100LBS. (KG)I.D.(INCHES)ATL10BNATL20BN1./02/0.358-.373.398-.424241 296 9/16 TU 52 7A, 8A245 296 BG 5/8 TWTY 58 9A1.501.500.870.930.870.931.501.625.405.7511 (5)20 (9).381.429ATL30BNATL40BNATL250BN3/04/0250.448-.470.503-.530.550-.576166 467 3/4 TV 60 66 10A298 660 840 TV 66 10A249 324 658 840 TX 74 11A1.501.751.751.061.181.251.001.001.061.751.872.005.506.006.0023 (10)29 (13)30 (14).480.538.585ATL300BNATL350BNATL400BN300350400.607-.636.654-.684.720-.740251 470 1.00 TX 76 12A299 654 705 1-1/8 TH, 87, 96, 13A472 490 717 1-1/8 94, 96, 106, 14A2.252.252.501.371.501.621.001.251.312.002.372.506.817.007.3147 (21)61 (28)67 (30).640.692.745ATL500BNATL600BNATL700BN500600700-750.784-.814.856-.893.964-1.000300 317 719 1- 5/16 106, 115, 15A318 473 720 1-5/16 112, 115, 125U 608 722 936 1-5/16 1253.003.003.371.701.701.701.311.311.312.622.752.817.757.788.3784 (38)103 (47)143 (65).823.9081.000ATL750BNATL800BN700-750795-800.964-1.0001.000-1.048301 723 1-1/2 125 140474 667 724 1-5/8 140 1503.373.371.702.251.371.433.003.128.568.62147 (67)264 (120)1.0141.047NOTE: Anderson’s VC63 Versa-Crimp tool will install sizes thru 500 MCM AHL-500-BN. VC6FT Versa-Crimp tool will installthrough AHL-750. A VC8 Versa-Crimp tool will accommodate sizes from 3/0 stranded through 1000 MCM AL / 1500MCM CU.HUBBELL – CENTRALIA, MISSOURIMARCH 2008
U-102-14POWER SYSTEMS, INC.®ANDERSONDISTRIBUTION CONNECTORSVERSAtile ALUMINUM COMPRESSION TERMINALTYPE VAULReplaces ESP AD; AMS; and ALM Series• For use with either VERSA-CRIMP ® or conventionalcompression tools.• Meets ANSI C 119.4 Class A performance on aluminumand ACSR conductor, minimum tension.• Meets ANSI C 119.4 Class C performance on copperconductor, minimum tension.• Connector barrels are prefilled with “Versa-Seal®” rubber compatible inhibitor and sealedwith color coded (thru 4/0) end caps.• Metal marked to indicate recommended conductorsand crimp dies.ALUMINUMVAUL• Material: Aluminum• Add Suffix “TP” for tin plated lugs.8CATALOGNUMBERDFVAUL812 1VAUL612 1VAUL412 1VAUL412BN 2VAUL112 1VAUL112BN 2VAUL1012 1VAUL1012BN 2VAULH612 1VAULH412 1VAULH112 1VAULH112BN 2VAULH1012 1VAULH1012BN 2INCHESFIG. DIA.NO. RANGEVERSA-CRIMP SYSTEM.146thru.162.146thru.204.146thru.268.146thru.332.146thru.398.146thru.204.146thru.258.146thru.332.213thru.398CONDUCTOR RANGE AWF OR MCMCABLE RANGE#8 STR AL-CU(#6 SOL)#8 STR #4 SOL AL-CU#6 ACSR#8 STR - #2 SOL AL-CU#6-#4 ACSR#6-#2 COMP#8 STR. #1 STR AL-CU#6-#2 ACSR#6-#1 COMP#8 STR-1/0 STR AL-CU#6-1/0 ACSR#6-2/0 COMP#8 STR. #4 SOL AL-CU#6 ACSR#8 STR-#2 SOL AL-CU#6-#4 ACSR#6-#4 COMP#8 STR-#1 AL-CU#6-#2 ACSR#6-#1 COMP#4 STR-1/0 AL-CU#4-1/0 ACSR#4-2/0 COMPCONVENTIONAL TOOLING RANGEDIMENSIONSINCHES (MM)INCHESCRIMPDIA.DIES/RANGE ACSR STRANDED (SOLID) COMPACT VC-TOOLCOLORCODE L W D T.146thru.162.184thru.204.232thru.268292thru.332—#6 (6/1)#4 (6/1),(7/1)#2 (6/1),(7/1)#8 AL-CU(#6 SOL)#6 AL-CU(#4 SOL)#4 AL-CU(#2 SOL)#2-#1 AL-CU——VC6350VC6VC6FTEEI8ABURNDYBG. 243KEARNEY5/8T&BTU.52BLACKBURN5/8GREEN 3.06(77.7)BLUE#2 ORANGE#1RED3.06(77.7)3.06(77.7)4.80(121.9)3.06(77.7)4.80(121.9)thru398 1/0 (6/1) 1/0 (6/1) 1.0 AL-CU 1/0-2/0 YELLOW 3.06336(77.7).169thru.204.213thru.258.268thru.332.336thru.398#6 (6/1)#6 AL-CU(#4 SOL)#6BLUE4.80(121.9)3.25(82.5)90 1.25(22.8) (31.7)90 1.25(22.8) (31.7)90(22.8)1.25(31.7)1.00(25.4).90(22.8)1.25(31.7)1.00(25.4).90(22.8)1.25(31.7)1.00(25.4).96 1.43(24.2) (36.3)#4 (6/1),(7/1)#4 AL-CU(#2 SOL)#4VC6350VC6VC6FTEEI11AORANGE 3.25 .96 1.43(82.5) (24.2) (36.3)BURNDYK8403.25 .96 1.43249(82.5) (24.2) (36.3)#2 (6/1),(7/1)#2-#1 AL-CU #2 - #1 KEARNEY RED8405.75T&B(146.01.25 1.87TX, 76)(31.7) (47.5)BLACKBURN8403.25 .96 1.43B49EA(82.5) (24.4) (36.3)(146.0)(31.7) (47.5)1/0 (6/1) 1/0 AL-CU 1/0-2/0 YELLOW5.751.25 1.87.27(6.8).27(6.8).27(6.8).31(7.8).27(6.8).31(7.8).27(6.8).31(7.8).25(6.4).25(6.4).25(6.4).25(6.4).25(6.4).25(6.4)APPROX.WT.EACHLBS.(KG.).087(0.04).076(0.04).074(0.03).129(0.06).069(0.03).129(0.06).065(0.03).120(0.05).135(0.06).132(0.06).127(0.06).224(0.10).121(0.05).217(0.10)I.D.(INCHES).186.233.281.281.355.355.416.416.218.272.340.340.412.412MARCH 2008HUBBELL – CENTRALIA, MISSOURI
Page 1 and 2:
DISTRIBUTION PRODUCTSINDEXSection D
Page 3 and 4:
• Fastest method of deadending Co
Page 5 and 6:
DISTRIBUTION CONNECTORSDEADENDSAUTO
Page 7 and 8:
• Redesigned GDW2000 Series• Fa
Page 9 and 10:
DISTRIBUTION CONNECTORSSECTION DADE
Page 11 and 12:
For distribution and light transmis
Page 13 and 14:
DISTRIBUTION CONNECTORSDEADENDSBOLT
Page 15 and 16:
Page 17 and 18:
For high tension transmission line
Page 19 and 20:
Page 21 and 22:
For deadending static wires.May be
Page 23 and 24:
For distribution and light transmis
Page 25 and 26:
These clamps are recommended for co
Page 27 and 28:
These clamps are used primarily for
Page 29 and 30:
DISTRIBUTION CONNECTORSSECTION DADU
Page 31 and 32:
DISTRIBUTION CONNECTORSSECTION DAIN
Page 33 and 34:
For aluminum or ACSR triplex conduc
Page 35 and 36:
DEADENDSBOLTED QUADRANT STRAIN CLAM
Page 37 and 38:
OVERHEAD LINE SPLICESAUTOMATICCOPPE
Page 39 and 40:
OVERHEAD LINE SPLICESAUTOMATICALUMI
Page 41 and 42:
OVERHEAD LINE SPLICESAUTOMATICBI-ME
Page 43 and 44:
OVERHEAD LINE SPLICES: AL AND AL-CU
Page 45 and 46:
OVERHEAD LINE SPLICES: AL AND AL-CU
Page 47 and 48:
• ANSI C119.4, partial tension, C
Page 49 and 50:
OVERHEAD LINE SPLICES: AACCOMPRESSI
Page 51 and 52:
OVERHEAD LINE SPLICESCOMPRESSIONFUL
Page 53 and 54:
VERSA-CRIMP® ALUMINUM COMPRESSION
Page 55 and 56:
OVERHEAD LINE SPLICES-CUCOMPRESSION
Page 57 and 58:
VACL/VACS/VACT—Anderson/BurndyCON
Page 59 and 60:
CONVENTIONAL COMPRESSION DIE TOOLIN
Page 61 and 62:
Page 63 and 64:
OVERHEAD PRIMARY TAPSHOT LINE TAP C
Page 65 and 66:
Page 67 and 68:
OVERHEAD PRIMARY TAPS AND STIRRUP P
Page 69 and 70:
Page 71 and 72:
OVERHEAD PRIMARY TAPSLIGHTNING ARRE
Page 73 and 74:
OVERHEAD PRIMARY TAPSHOT LINE CONNE
Page 75 and 76:
OVERHEAD PRIMARY TAPSSTIRRUP CLAMPS
Page 77 and 78:
OVERHEAD PRIMARY TAPSBOLTEDSTIRRUP
Page 79 and 80:
OVERHEAD PRIMARY TAPSSTIRRUP CONNEC
Page 81 and 82:
HEAVY DUTY COMPRESSION STIRRUPTYPE
Page 83 and 84:
OVERHEAD PRIMARY TAPSCOMPRESSIONVER
Page 85 and 86:
VERSAtile ALUMINUM COMPRESSION TEEA
Page 87 and 88:
VERSA-CRIMP® ALUMINUM COMPRESSION
Page 89 and 90:
VERSAtile COPPER COMPRESSION TEECOP
Page 91 and 92:
VACL/VACS/VACT—Anderson/BurndyCON
Page 93 and 94:
VCCTCONVENTIONAL COMPRESSION DIE TO
Page 95 and 96:
DISTRIBUTION PRODUCTSINDEXgeneral u
Page 97 and 98:
SECTION DDALUMINUMGA9000DISTRIBUTIO
Page 99 and 100:
SECTION DDDISTRIBUTION CONNECTORSBR
Page 101 and 102:
SECTION DDDISTRIBUTION CONNECTORSGE
Page 103 and 104:
SECTION DDDISTRIBUTION CONNECTORSBR
Page 105 and 106:
SECTION DDBRONZELAT, GC207LADISTRIB
Page 107 and 108:
SECTION DDFASTENERS DISTRIBUTION AN
Page 109 and 110:
SECTION DDALUMINUMGO32DISTRIBUTION
Page 111 and 112:
SECTION DDDISTRIBUTION CONNECTORSSE
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
SECTION DDALUMINUMLC50 & LC80DISTRI
Page 121 and 122:
SECTION DDALUMINUMLCU10DISTRIBUTION
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
SECTION DDBRONZELC1000DISTRIBUTION
Page 129 and 130:
SECTION DDBRONZELC400DISTRIBUTION C
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
SECTION DEALUMINUMTSCDISTRIBUTION C
Page 143 and 144:
SECTION DEALUMINUM97642DISTRIBUTION
Page 145 and 146:
SECTION DEDISTRIBUTION CONNECTORSBR
Page 147 and 148:
SECTION DEDUCTILE IRONGWB1SDISTRIBU
Page 149 and 150:
SECTION DEDISTRIBUTION CONNECTORST2
Page 151 and 152:
SECTION DEDISTRIBUTION CONNECTORSDE
Page 153 and 154:
SECTION DEALUMINUMHAST2DISTRIBUTION
Page 155 and 156:
Page 157 and 158:
SECTION DFDISTRIBUTION CONNECTORSVE
Page 159 and 160:
SECTION DFDISTRIBUTION CONNECTORSBI
Page 161 and 162:
SECTION DFDISTRIBUTION CONNECTORSAL
Page 163 and 164:
SECTION DFDISTRIBUTION CONNECTORSTY
Page 165 and 166:
Page 167 and 168:
SECTION DFDISTRIBUTION CONNECTORSSH
Page 169 and 170:
SECTION DFDISTRIBUTION CONNECTORSDI
Page 171 and 172:
SECTION DFDISTRIBUTION CONNECTORSDF
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
SECTION DFDISTRIBUTION CONNECTORSTY
Page 181 and 182:
SECTION DFDISTRIBUTION CONNECTORSTI
Page 183 and 184:
SECTION DFCOPPERBCLDISTRIBUTION CON
Page 185 and 186:
SECTION DFDISTRIBUTION CONNECTORSCa
Page 187 and 188:
Page 189 and 190:
SECTION DFALUMINUMVCSEDLDISTRIBUTIO
Page 191 and 192:
SECTION DFALUMINUMVAUS5"2-7/16" 2-7
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
SECTION DFCOPPERVHSSDISTRIBUTION CO
Page 201 and 202:
SECTION DFCOPPERVCCDISTRIBUTION CON
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
TELECOM & GROUND CONNECTORSVISE TYP
Page 219 and 220:
TELECOM CONNECTORSVISE TYPEBRONZEBR
Page 221 and 222:
SPECIAL TELECOMVISE TYPEBRONZEGROUN
Page 223 and 224:
Page 225 and 226:
POLYPROPYLENEGSOTHER DISTRIBUTIONON
Page 227 and 228:
VINYLRG100 seriesOTHER DISTRIBUTION
Page 229 and 230:
DESCRIPTIONINHIBITORSHTJCDISTRIBUTI
Page 231 and 232:
DESCRIPTIONINHIBITORSVERSA-SEAL®VS
Page 233 and 234:
JOINT COMPOUND REQUIREDHTJCDISTRIBU
Page 235 and 236:
TAMPERPROOF EQUIPMENT LOCKSLOCKSGM3
Page 237 and 238:
Page 239 and 240:
SECTION DJREFERENCE DATADJ2C. For w
Page 241 and 242:
SECTION DJREFERENCE DATARECOMMENDED
Page 243 and 244:
SECTION DJREFERENCE DATAKEY SYMBOLS
Page 245 and 246:
SECTION DJREFERENCE DATANEMA CONSTR
Page 247 and 248:
SECTION DJREFERENCE DATACONDUCTOR Q
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
SECTION DJREFERENCE DATAALUMINUM CO
Page 255 and 256:
SECTION DJREFERENCE DATAALL-ALUMINU
Page 257 and 258:
SECTION DJREFERENCE DATASELF-DAMPIN
Page 259 and 260:
SECTION DJREFERENCE DATAALUMINUM CO
Page 261 and 262:
SECTION DJREFERENCE DATAGALVANIZED
Page 263 and 264:
FORMED WIRE PRODUCTSINDEXDISTRIBUTI
Page 265 and 266:
ALUMINUM/STEELAWDEDEADENDSFORMED WI
Page 267 and 268:
ALUMINUM / STEELDGFWDEADENDSFORMED
Page 269 and 270:
ALUMINUM / STEELLDICTOP TIEFORMED W
Page 271 and 272:
ALUMINUM / STEELLDIFTOP TIEFORMED W
Page 273 and 274:
ALUMINUM / STEELLDIJTOP TIEFORMED W
Page 275 and 276:
ALUMINUM ALLOYLDID0xxxDOUBLE SUPPOR
Page 277 and 278:
ALUMINUM / STEELLLAFSIDE TIEFORMED
Page 279 and 280:
ALUMINUM / STEELQWSTCSIDE TIEFORMED
Page 281 and 282:
ALUMINUM / STEELQWSTFSIDE TIEFORMED
Page 283 and 284: ALUMINUM / STEELLLDU4xxxDOUBLE SIDE
Page 285 and 286: ALUMINUM ALLOYLROSPOOL TIEFORMED WI
Page 287 and 288: ALUMINUM ALLOYQWSPSPOOL TIEFORMED W
Page 289 and 290: COMPOSITE TIEGS900FORMED WIRECOMPOS
Page 291 and 292: COMPOSITE TIEGJ800/810FORMED WIRECO
Page 293 and 294: Galvanized Steel Guy Wire DeadendsF
Page 295 and 296: Service Grip DeadendsSGFW Cross Ref
Page 297 and 298: Distribution Ties - C Neck Insulato
Page 299 and 300: GROUPDistribution Tie - C NeckDistr
Page 301 and 302: Distribution Ties - F Neck Insulato
Page 303 and 304: Distribution Ties - J Neck Insulato
Page 305 and 306: Double Support Ties, C Neck (2-1/4)
Page 307 and 308: Side Ties; F Neck (2-7/8)LLAF Serie
Page 309 and 310: GROUPSide Tie; 2-7/8 NeckSide Tie;
Page 311 and 312: QUIK-WRAP Side Ties, C Neck Insulat
Page 313 and 314: QUIK-WRAP Side Ties, F Neck Insulat
Page 315 and 316: Double Side Ties, J Neck (3-1/2)LLD
Page 317 and 318: Spool Ties, 1-3/4” Neck Diameter
Page 319 and 320: QUIK-WRAP Spool Ties, 1-3/4” Diam
Page 321 and 322: Distribution Formed Wire ProductsAb
Page 323 and 324: U-102-2®ANDERSONPOWER SYSTEMS, INC
Page 331 and 332: U-102-10®ANDERSONPOWER SYSTEMS, IN
Page 333: U-102-12®ANDERSONPOWER SYSTEMS, IN
Page 343 and 344: U-102-22POWER SYSTEMS, INC.®ANDERS
Page 355: U-102-58POWER SYSTEMS, INC.®ANDERS
show all

OVERHEAD LINE SPLICES

Create successful ePaper yourself

Delete template?

Save as template?