OVERHEAD LINE SPLICES

DISTRIBUTION CONNECTORSSECTION DFTYPE BCL Copper Compression Connector—ContinuedCATALOGNUMBERBCL075B2BCL075CBCL075DBCL080B2BCL100B2BCL100CBCL100DBCL150CBCL150DBCL200CBCL200DFIG.NO.1COPPER CONDUCTOR RANGEDIMENSIONS INCHES (MM)CABLE DIA.DIEREF. L A B K T W1.312.9982 750 MCM1.312(25.35)2 1.3121 800 MCM11.031(26.19)1.5001.5001.1522 1000 MCM1.500(29.26)2 1.50022.1251.4121500 MCM(35.86)2 2.12522000 MCM1.632(41.45)2.3752 2.3758-3/4(222.25)8-7/8(225.42)10-3/4(273.05)9(228.6)9(228.6)9(228.6)10-3/4(273.05)10-1/2(266.7)11-1/2(292.1)11-1/2(292.1)12-1/2(317.5)4(101.6)4(101.6)4(101.6)4(101.6)4(101.6)4(101.6)4(101.6)5(127.0)5(127.0)6(152.4)6(152.4)3-1/4(82.55)3-1/4(82.55)4-1/4(107.95)3-1/4(82.55)3-1/4(82.55)3-1/4(82.55)4-1/4(107.95)3-1/4(82.55)4-1/4(107.95)3-1/4(82.55)4-1/4(107.95)5/8(15.88)5/8(15.88)1-1/8(25.58)5/8(15.88)5/8(15.88)5/8(15.88)1-1/8(28.58)5/8(15.88)1-1/8(28.58)5/8(15.88)1-1/8(28.58)1/2(12.7)5/16(7.9)1/2(12.7)5/8(15.88)5/8(15.88)3/8(9.5)1/2(12.7)5/8(15.88)5/8(15.88)3/4(19.05)3/4(19.05)2(50.8)3(76.2)4(101.6)2(50.8)2(50.8)3(76.2)4(101.6)3(76.2)4(101.6)3(76.2)4(101.6)APPROX.WT. EACHLBS. (KG)2.0(.9)2.2(1.0)4.2(1.9)3.3(1.5)3.1(1.4)3.3(1.5)4.2(1.9)7.5(3.4)9(4.1)11(5.0)13(5.9)CONVENTIONAL COMPRESSION DIE INFORMATIONDIE INDEX KEARNEY ALCOA BURNDY T&B.640 5/8 73AH 243 52.840 .840 OR .849 74AH 249 761.000 1.000 75AH 2511.125 1-1/8 76AH 490,347,316 961.312 1-5/16 20AH 327,317,426,300 1061.500 1-1/2 24AH 318,261,608 1251.843 1-5/8,K6030AH 27AH 30AH 292,302,352,579 1502.125 2-1/8 34AH 422,575 160,1612.375 2-3/8 38AH 478,728 1892.937 2-15/16 44AH 48AH 740 250DF29NOTE:1. Crimps should overlap and start from the inside working outward with the last crimp extending past the end of the connector.2. It is recommended that a light coat of lubricant (such as Anderson’s I55 grease) be applied to the crimping face of the dies.DF-29HUBBELL ® Power Systems April 2012