OVERHEAD LINE SPLICES

SECTION DDDISTRIBUTION CONNECTORSGENERAL USEVISE TYPE PARALLEL GROOVEBRONZEBRONZEGC8000• For copper to copper conductor -splice, loop deadend orservice entrance tapsMaterial:Castings—Copper alloyHardware—Stainless steelGalvanized SteelSilicon BronzeDD23Suffix Construction:“G” = Grommets — holds spacer during OH installs“L” = Inhibitor Applied @ FactoryCATALOGNUMBER*CONDUCTOR RANGEMAX. MIN. ASOL. STR. SOL. (MM)APPROX. DIMENSIONS INCHESB(MM)C(MM)BOLTSIZEBOLTHEAD(HEX)WT LB(KG)GC8002 2 3 81 3/8(34.99)1 1/4(31.81)7/8(22.27)5/16(7.95)9/16(14.32).16(.07)GC8010 1/0 1 81 1/2(38.18)1 3/8(34.99)1(25.45)5/16(7.95)9/16(14.32).24(.11)GC8020 3/0 2/0 81 3/4(44.54)1 3/8(34.99)1 1/8(28.63)5/16(7.95)9/16(14.32).33(.15)GC8040** 4/0 4/0 62 3/8(60.44)1 1/2(38.18)1 1/2(38.18)3/8(9.54)9/16(14.32).62(.28)*For Tin Plated Connectors add Suffix “P” to the Catalog Number desired.**RUS ListedConductor RangeEach size will close on two of the maximum size conductors, one minimum and one maximum size, or combinations in between.Hot Stick InstallationAll connectors are available with flexible neoprene grommets to hold spacer bar in position so run and tap connectors may beinstalled with ease. Grommets positioning spacer do not interfere with smooth operation of connector. If clamps are to beequipped with grommets, please specify by adding suffix “G” to the catalog number.Inhibitor Protected and BaggedConnectors are available with Factory installed Fargolene inhibitor and individually packaged. When ordering add the Suffix “L”to catalog number.DD-23January 2013HUBBELL ® Power Systems