OVERHEAD LINE SPLICES

U-102-18®ANDERSONPOWER SYSTEMS, INC.DISTRIBUTION CONNECTORSTYPE VHCL Copper Compression Terminal—ContinuedLISTED261LCATALOGNUMBERNO.PADHOLESVHCL2038 1COPPER CONDUCTORCONVENTIONALTOOLINGVERSA-CRIMP ®SYSTEM RANGEVERSA-CRIMP ®TOOLTYPERefer to page DF-34 for recommended tool and die information.Continued on next page.HIGH VOLTAGE APPLICATIONS—All Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) arerated at 34.5 KV. The other U.L. Listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximumUL voltage requirement of less than 2000 volts, however Anderson recommends these connectors for applicationthrough 34.5 KV subject to manufacturers’ limitations for insulation material.For further information, contact factory.PADBOLTDIA.VHCL2012 11/ 22/0 Str. #4-2/0 Str.VHCL2038B 23/ 8VHCL2012BN 21/ 2VHCL3038 1VHCL3012 11/ 23/0 Str. #2-3/0 Str.VHCL3038B 23/ 8VHCL3012BN 21/ 2VHCL4038 1VHCL4012 1VC61/ 2(ALL)VC7VHCL40516B 2 4/0 Str. #1-4/0 Str.(ALL)5/16VHCL4038B 23/ 8VHCL4012BN 21/ 2VHCL25012 1VHCL25058 15/ 8250 MCM 1/0-250 MCMVHCL25038B 23/ 8VHCL25012BN 21/ 2VHCL30012 1VHCL30038B 2 300 MCM 2/0-300 MCM3/ 8VHCL30012BN 21/ 2VHCL35012 11/2VHCL35058 1VC63VC7 5/ 8350 MCM 3/0-350 MCM VC6FTVHCL35038B 2VC7FT 3/ 8VHCL35012BN 21/ 23/83/83/81/21/2L3(76.2)3-1/4(82.55)3-7/8(98.42)5-1/16(128.57)3(76.2)3-1/4(82.55)3-15/16(100.01)5-1/8(130.18)3-1/4(82.55)3-1/2(88.9)4(101.6)4-1/8(104.78)5-5/16(134.92)3-9/16(90.52)3-7/8(98.42)4-1/4(107.95)5-3/8(136.52)4(101.6)4-11/16(119.06)5-13/16(147.64)4-1/16(103.17)4-3/8(111.12)4-3/4(120.65)5-7/8(149.22)DIMENSIONS INCHES (MM)B1-1/2(38.1)1-1/2(38.1)1 5/8(41.28)1-5/8(41.28)2(50.8)2(50.8)W13/16(20.64)15/16(23.81)1(25.4)1-1/8(28.58)1-3/16(30.16)1-5/16(33.32)C——1(25.4)1-3/4(44.45)——1(25.4)1-3/4(44.45)——7/8(22.22)1(25.4)1-3/4(44.45)——1-1/16(26.98)1-3/4(44.45)—1-1/16(26.98)1-3/4(44.45)——1-1/16(26.98)1-3/4(44.45)T1/8(3.18)1/8(3.18)1/8(3.18)3/16(4.76)3/16(4.76)3/16(4.76)APPROX.WT. EACHLBS. (KG).09(.040).10(.046).12(.054).15(.068).10(.045).11(.049).14(.063).18(.081).14(.063).15(.068).18(.081).18(.081).23(.104).19(.086).20(.09).22(.099).28(.127).22(.099).26(.12)I.D.(INCHES).443.443.443.443.490.490.490.490.547.547.547.547.547.595.595.595.595.650.650.26(.12) .650.28(.127).700.31(.141).700.31(.14).700.31(.14).700MARCH 2008HUBBELL – CENTRALIA, MISSOURI