OVERHEAD LINE SPLICES

U-102-8®ANDERSONPOWER SYSTEMS, INC.LISTED261LTYPE VHCS COPPER COMPRESSION TERMINAL (continued)CATALOGNUMBERNO.PADHOLESCOPPER CONDUC-TORCONVEN-TIONALTOOLINGVERSA-CRIMP®SYSTEMRANGEVERSA-CRIMP®TOOLTYPEPADBOLTDIA.DIMENSIONS INCHES (MM)L B W C TAPPROX.WT. EACHLBS. (KG)I.D.(INCH-ES)VHCS300516 15/163(76.2)—.15(.068).650VC6VHCS30038 1 (ALL) 3/82/0-300300 MCMMCM.VHCS30012 1 VC7 1/2(ALL)3(76.2)3-1/16(77.77)1-1/16(26.97)1-3/16(46.04)——3/16(4.76).15(.068).15(.068).650.650VHCS30012BN 2 1/24-7/8(123.82)1-3/4(44.45).19(.086).650VHCS35038 13/8VHCS35012 1 350 MCMVC6-3VC7FT3/0-350 VC7MCM VC6FT1/2VHCS35012BN 2 1/23-1/8(79.383-3/16(80.96)5(127.0)1-1/81-5/16(33.32)——1-3/4(44.45)3/16(4.76).18(.082).18(.082).18(.082).700.700.700VHCS40012 11/2400 MCM4/0-400MCMVHCS40058 1 5/8VHCS50038 1*VC6500VC63VC73/8VHCS50012 1 VC6FT 1/24/0-500500 MCMVC7FTMCMVHCS50058 1 5/83-3/8(85.72) 1-3/163-5/8 (30.16)(92.08)3-1/2(88.9)3-3/4(95.25)3-7/8(98.42)1-3/8(34.92)1 -3/8(34.92)1-1/2(38.1)—————3/16(4.76)1/4(6.35).24(.109).24(.109).35(.159).35(.159).35(.159).762.762.834.834.834VHCS50012BN 2 1/25-3/8(136.52)1-3/4(44.45).41(.186).834VHCS60058 15/8600 MCM 250-600MCMVHCS60012BNVHCS7505821VC6FTVC7FTVC8*1/25/8750 MCM 500-750MCMVHCS75012BN 2 1/24-1/4(107.95) 1-3/85-1/2 (34.92)(139.70)5(127.0) 1-5/86-1/16 (41.28)(153.97)1-11/16(42.86)1-15/16(49.21)—1-3/4(44.45)—1-3/4(44.45)1/4(6.35)1/4(6.35).50(.227).55(.249).65(.295).70(.317).923.9231.0301.030Refer to page DF-33 for recommended tool and die information.*VC8 tool crimping range is 500-1500 MCM Cu.HIGH VOLTAGE APPLICATIONS—All Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) are rated at 34.5KV. The other U.L. Listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum UL voltage requirement ofless than 2000 volts, however Anderson recommends these connectors for application through 34.5 KV subject to the manufacturers’limitations for insulation material.For further information, contact factory.MARCH 2008HUBBELL – CENTRALIA, MISSOURI