OVERHEAD LINE SPLICES

For deadending static wires.May be used to deadend copper or Copperweld ® phase conductors.Magnetic induction heating will occur.Material:Body and Keeper—galvanized ductile ironHardware—galvanized steelSockets and Clevises—ductile iron, galvanizedCotter Pin—#302 stainless steelDISTRIBUTION CONNECTORSDEADENDSBOLTEDSTRAIGHT LINE STRAIN CLAMPFERROUSSECTION DADUCTILE IRONMDEDA19CATALOGNUMBERMDE40NMDE40SMDE40CMDE46NMDE46SMDE46CMDE60NMDE60SMDE60CTYPENoneSocketClevisNoneSocketClevisNoneSocketClevisFITTINGCAT. NO.—SA04CA04—SA04CA04—SA04CA04876722000 None —876822000 None —876922000 None —CLAMPINGRANGEINCHES(MM).16-.40(4.06-10.16).18-.46(4.57-11.68).36-.60(9.14-15.24).46-.86(11.68-21.84).65-1.25(16.51-31.75).86-1.55(21.84-39.37)ULTIMATEBODYSTRENGTHLBS. (KG)5,000(2,268)6,000(2,722)8,000(3,629)10,000(4,536)10,000(4,536)10,000(4,536)NO.122222U-BOLTSDIMENSIONSINCHES (MM)SIZEINCHES(MM) L W A X B1/2(12.70)3/8(9.53)1/2(12.70)1/2(12.70)1/2(12.70)3/8(9.53)6-3/16(157.16)7-1/2(190.5)8-15/16(227.01)9-1/4(234.95)11(279.40)12.5(317.50)13/16(20.6)3/4(19.05)3/4(19.05)3/4(19.05)3/4(19.05)3/4(19.05)7/8 x 1-1/4(22.2 x 31.8)7/8 x 1-1/4(22.2 x 31.8)7/8 x 1-1/4(22.2 x 31.8)1 x 1-7/16(25.4 x 36.5)1 x 1-13/16(25.4 x 36.5)1-1/18 x - 1/8(27.0 x 54.0)APPROX.WT. EACHLBS. (KG)2.1 (.95)3.4 (1.54)3.7 (1.68)2.5 (1.13)3.8 (1.72)4.1 (1.86)3.8 (1.72)5.0 (2.27)5.4 (2.45)3.8 (1.72)5.5 (2.49)7.9 (3.58)NOTES: (1) Recommended torque on U-bolts; 3/8”—240 ins. lbs., 1/2”—480 in. lbs., 5/8”—720 in. lbs.(2) Lifting eye is standard on MDE type clamps.(3) 87600 series without lifting eye.DA-19HUBBELL ® Power SystemsDecember 2011