OVERHEAD LINE SPLICES

OVERHEAD PRIMARY TAPSSTIRRUP CONNECTORALUMINUMALUMINUMGA100SL• GA100S Series Hot Line Stirrup Connector provides aconvenient method to install tap connections whichmust be removed and re-installed frequently.• Easily installed with standard Hot Stick equipment,and are recommended for uses on aluminum or ACSRrun conductors in conjunction with a bronze hot linetap on the stirrup bail.• Long term performance is assured by the field provendesign incorporating, a large connector mass, visetypeinterlocking components, and a short low resistancecurrent transfer through a soft, pure aluminumspacer.DC17DB-17• The #2 Sol. hard drawn copper stirrup is positionedfor adequate clearance. Additional stirrup sizes areavailable. Factory loaded with inhibitorMaterial:Body Casting – Aluminum AlloyEyestem – Forged Aluminum2.84(72)1.88(47)8.58(217)5.25(133)#250C(.258”)5.25(133)CATALOGNUMBERProduct Data & Conductor SizeCOPPER LOOP SIZEIN (MM)CONDUCTOR RANGE(AWG OR KCMIL)APPROX.WT. EACHLBS. (KG)GA102S*L #2 Sol. (.258) #6 Sol. - #2/0 ACSR .96(.44)GA104S*L #2 Sol. (.258) #4 ACSR - #4/0 ACSR 1.24(.56)GA106S*L #2 Sol. (.258) #2/0 ACSR – 397.5 ACSR 1.32(.60)GA108S*L #2 Sol. (.258) #4/0 ACSR – 954 ACSR 1.44(.65)*For 2/0 Sol Stirrup Add Suffix “6” (e.g. GA108S6L)For Plated Stirrup Add Suffix “P”Suffix “L” indicates Inhibitor Protected as Standard.ANDERSON HUBBELL ® POWER SYSTEMS FARGO ® DECEMBER 2012