OVERHEAD LINE SPLICES

DISTRIBUTION CONNECTORSSECTION DFVCELCONVENTIONAL COMPRESSION DIE TOOLING(Crimps per Connection)ANDERSON VERSA-CRIMP ® COMPRESSION TOOLS(Crimps per Connection)Thomas & Betts(Crimps)Kearney(Crimps)Burndy LongitudinalIndent(Crimps)VERSA-CRIMP ® Tools(Number of Crimps)Hyd.ToolsTools ToolsY35ToolsTBM5 12, 15Y39“WH”TBM8 20 & 40Y45TonDie Die Die DieDIECOLOR*CODEWIRESIZEV-C ToolsWire RangeCatalogNumberVCELVC8ALNIBSVC6FTVC6➀*VC6-500 VC6-350Tan(2 O’lp) 45(1)29/3276H or★ (1) (2)or 183HTan U25ART ➀ (1)1/0 Str.AL/CU2 2 1 1#8-1/0 Str.AL/CU-0212/0 Str.AL/CU223Blue U30ART (1)3#1-2/0 Str.AL/CU-022O’lapO’lapO’lap76H or83H(2)29/32or 1★ (1)4/0 Str.AL/CU223Blue U30ART (1)32/0-4/0 Str.AL/CU-024O’lapO’lapO’lap76H or83H(2)29/32or 1★ (1)300 MCMAL/CU223Blue U30ART (1)3#4-300MCM AL/CU-030O’lapO’lapO’lap76H(2)29/32★ (1)350 MCMAL22Blue U30ART (1)3 O’lap250-350MCM AL-035O’lapO’lap94H(3)1-1/8 - 1(2 O’lap)or 1-1/8 - 2★ (2)U32 ART(2)Green500 MCMAL/CU4 O’lap 2 22/0 - 500MCM AL/CU-050★ 106H(3)1-1/4+ ★ (2)UM or U34ART(2)Pink600 MCMAL2 2400-600MCM AL-500MCM CU-060★ 106H(3)1-1/4+ ★ (2)U34ART(2)Pink750 MCMAL2 2500-750MCM AL-500MCM CU-075BURNDY TOOLS/DIES (VCEL - 100 ONLY)Y48B Tool Y486RB ToolNestNestDieDieNone1000 MCMAL3750-1000MCM AL-100IndentorIndentorF46D (1)C46D (1)F44AR (2)C44AR (2)Y48PR-1Y48PR-1+ WH-2 Tool ONLY★ Before making first crimp, make certain that the edge of the die block is located to clear the back edge of the “VCEL” tongue.➀ Partial crimp. Crimp dies extend beyond the end of the crimp barrel.➁ Color code is for Anderson and Burndy dies only. Use the recommended die number (NOT die color) for Kearney & T&B Hyd. Tools/Dies.* Not UL Listed-Pending completion of test.DF15DF-15HUBBELL ® Power Systems April 2012