OVERHEAD LINE SPLICES

More documents

Recommendations

Info

DISTRIBUTION CONNECTORSDISTRIBUTION POWER CONNECTORSSYSTEMS, INC.®ANDERSONU-102-27ALUMINUMVAUS5"2-7/16" 2-7/16"OVERHEAD LINE SPLICES; AL AND AL-CUCOMPRESSIONVERSAtile REDUCING SPLICELOOP JUMPER / MINIMUM TENSION(CONTINUED)1.1877-1/2"3-9/16" 3-9/16"1.3501 1/8" Die SizeDIELESS VERSA-CRIMP: TOOLS.840" DIE SIZE: STD. TOOLSCATALOGNUIMBERVERSA-CRIMP VC6SERIES (ALL) TOOLINGRANGESINSIDEDIAM.(INCHES)A/B ENDSCONVENTIONAL DIE-TYPECONDUCTOR RANGESSTAN-DARDDIE SETSCOLORCODEDENDVAUS201**#4-2/0 Str. Al/Cu/ACSR2/0 Str. Al/Cu/ACSR-3/0 Comp..469 / .355#6-#1 Str. Al/Cu & #6-#2 ACSR#2-#1 Str. Al/Cu & #2 ACSR-#1-1/0 Comp.840VAUS2010**#4-2/0 Str. Al/Cu/ACSR2/0 Str. Al/Cu/ACSR-3/0 Comp.Gray.469 / .429#4-1/0 Str. Al/Cu/ACSR1/0 Str. Al.Cu/ACSR-2/0 Comp.YellowVAUS2020** #4-2/0 Str. Al/Cu/ACSR .469 / .469 2/0 Str. Al/Cu/ACSR-3/0 Comp.GrayVAUS304**#4-3/0 Str. Al/Cu/ACSR3/0 Str. Al/Cu/ACSR-4/0 Comp.Black.531 / .281#8 Str.-#2 Sol. Al/Cu & #6-#4 ACSR#4 Str.-#2 Sol. Al/Cu & #4 ACSROrangeVAUS301**#4-3/0 Str. Al/Cu/ACSR3/0 Str. Al/Cu/ACSR-4/0 Comp.Black.531 / .355#6-#1 Str. Al/Cu & #6-#2 ACSR#2-#1 Str. Al/Cu & #2 ACSR-#1-1/0 Comp.RedVAUS3010**#4-3/0 Str. Al/Cu/ACSR3/0 Str. Al/Cu/ACSR-4/0 Comp.Black.531 / .421#4-1/0 Str. Al/Cu/ACSR1/0 Str. Al/Cu/ACSR-2/0 Comp.YellowVAUS3020**#4-3/0 Str. Al/Cu/ACSR3/0 Str. Al/Cu/ACSR-4/0 Comp.Black.531 / .469#4-2/0 Str. Al/Cu/ACSR2/0 Str. Al/Cu/ACSR-3/0 Comp.GrayVAUS3030** #4-3/0 Str. Al/Cu/ACSR .531 / .531 3/0 Str. Al/Cu/ACSR-4/0 Comp.BlackEE1-11A Burndy K840 Index 249T&B TX 76 76HBlackburn 840 B49EA Kearney: 840VAUS404**#4 Sol. -250 Str. Al/Cu & #5-4/0 ACSR4/0-250 Str. Al/Cu/ACSR-250-300 Comp.Pink.595 / .281#8 Str.-#2 Sol. Al/Cu & #6-#4 ACSR#4 Str.-#2 Sol. Al/Cu & #4 ACSROrangeVAUS401**#4 Sol.-250 Str. Al/Cu & #5-4/0 ACSR4/0-250 Str. Al/Cu 4/0 ACSR 250-300 Comp.Pink.595 / .355#6-#1 Str. Al/Cu & #6-#2 ACSR#2-#1 Str. Al/Cu/ACSR-#1-1/0 Comp.RedVAUS4010**#4 Sol.-250 Str. Al/Cu & #5-4/0 ACSR4/0-250 Str. Al/Cu 4/0 ACSR-250-300 Comp.Pink.595 / .421#4-1/0 Str. Al/Cu/ACSR1/0 Str. Al/Cu/ACSR-2/0 Comp.YellowVAUS4020**#4 Sol.-250 Str. Al/Cu& #5-4/0 ACSR4/0-250 Str. Al/Cu 4/0 ACSR 250-300 Comp.Pink.595 / .469#4-2/0 Str. Al/Cu/ACSR2/0 Str. Al/Cu/ACSR-3/0 Comp.GrayVAUS4030**#4 Sol.-250 Str. Al/Cu & #5-4/0 ACSR4/0-250 Str. Al/Cu 4/0 ACSR-250-300 Comp.Pink.595 / .531#4-3/0 Str. Al/Cu/ACSR3/0 Str. Al/Cu/ACSR-3/0 Comp.BlackVAUS4040** #4 Sol.-250 Str. Al/Cu & #5-4/0 ACSR .595 / .595 4/0-250 Str. Al/Cu 4/0 ACSR-250-300-Comp. PinkVAUS34930**#1-350 Str. & #1-336.4 18/1 ACSR300-350 Str. & 336.4 18/1 ACSR-350-400 Comp..704 / .531#4-3/0 Str. Al/Cu/ACSR3/0 Str. Al/Cu/ACSR-4/0 Comp.VAUS34940**#1-350 Str. & #1-336.4 18/1 ACSR300-350 Str. & 336.4 18/1 ACSR-350-400 Comp..704 / .595#4 Sol.-250 Str. Al/Cu & #5-4/0 ACSR4/0-250 Str.-4/0 ACSR-250-300 Comp.VAUS349349** #1-350 Str. & #1-336.4 18/1 ACSR .704 / .704 300-350 Str. & 336.4 18/1 ACSR 350-400 Comp.1 5/16" Die SizeNoneBlackNonePinkNoneNoneAPPROX.WT. EACHLBS. (KG).203(.092).195(.088).189(.086).201(.091).194(.088).186(.084).180(.082).171(.078).181(.082).184(.083).176(.080).170(.077).161(.073).151(.068).200(10).200(10).190(9)VAUS300300**VAUS350350**VAUS400400**VAUS500500**DIELESS VERSA-CRIMP: TOOLS 1-1/8" DIE SIZE: STD. TOOLS3/0-300 Str. Al/Cu3/0 (6/1)-266.8 (18/1) ACSR3/0-350 Str. Al/Cu3/0(6/1)-336.4 (18/1) ACSR4/0-400 Str. Al/Cu4/0 (6/1)-397-(18/1) ACSR4/0-500 Str. Al/Cu4/0 (6/1)-477 (18/1) ACSR.650 / .650.718 / .718.781 / .781.843 / .843250-300 Str. Al/Cu & 300-350 Comp.4/0 (6/1)-266.8 (18/1) ACSR336.4-350 Str. Al/Cu & 350-400 Comp.266.8 (6/7)-336.4(18/1) ACSR336.4-400 Str. Al/Cu & 500 Comp.336.4 (36.1)-397 (18/1) ACSR450-500 Str. Al/Cu & 600 Comp.397.5 (18/1)-477 (18/1) ACSREEI-13A Burndy:U32 ART Index 655 & 472705, 316 Kearney: 1 1/8T&B 96 & 96H Blackburn: B80EANoneNoneNoneNone.379(.172).349(.158).313(.142).275(.125)VAUS475475**VAUS575575**VAUS675675**VC6/VC8 VERSA-CRIMP: TOOLS 1-5/16" DIE SIZE: STD. TOOLS4/0-500 Str.4/0 (6/1)-477 (18/1) ACSR250-556.5 Str.266.8(18/1)-556.5 18/1 ACSR350-700 Str.336.4 (18/1)-605 26/7 ACSR.843 / .843.900 / -.9001.000 /1.000450-500 Str. & 600 Comp.397 (18/1) (24/7) (26/7) (30/7) ACSR477 (36/1) (18/1) ACSR500-556.5 Str. & 650-700 Comp.477 (18/1) (24/7) (26/7) ACSR556 (36/1) (18/1) ACSR600-700 Str. & 750-795 Comp.477 (30/7) 556.5 (18/1) (24/7) (26/7) (30/7) ACSR636 (18/1) (36/1) 605 (36/1) (24/7) (26/7) ACSREEI-14A Burndy: Index317,327,719 Kearney:1-5/16 T&B 106HBlackburn: B20AHNoneNoneNone.748(.389).646(.307)9(228.6) For VC6350/VC6500 Conductor range is limited to conventional tool/die wire range.HUBBELL – CENTRALIA, MISSOURIMARCH 2008
U-102-28®ANDERSONPOWER SYSTEMS, INC.DISTRIBUTION CONNECTORSCOPPERVHSSOVERHEAD LINE SPLICES-CUCOMPRESSIONVERSAtile COMPRESSION SPLICEMINIMUM TENSION – STANDARD LENGTH• For use with either VERSA-CRIMP ® or conventionalcompression tools.• For copper stranded conductor, only.• Color coded bands for easy die selection.Material: Copper—Tin plated.DLLISTED261LCATALOGNUMBERCOPPER CONDUCTORCONVENTIONALTOOLINGVERSA–CRIMPSYSTEM RANGEVERSA-CRIMPTOOLTYPEDIMENSIONSINCHES (MM)LDAPPROX.WT. EACHLBS. (KG)I.D.(INCHES)VHSS6 #6 Str. #6 Str.VHSS4 #4 Str. #4 Str.VC6350VC65001-3/4(44.45)1-3/4(44.45)13/16(20.64)13/16(20.64).020(.01).026(.01).198.246VHSS2 #2 Str. #6–#2 Str.1-7/8(47.62)7/8(22.22).04(.018).306VHSS1 #1 Str. #6-#1 Str.1-7/8(47.62)7/8(22.22).052(.023).358VHSS10 1/0 Str. #6-1/0 Str.VHSS20 2/0 Str. #4-2/0 Str.VC6(ALL)1-7/8(47.62)2(50.8)7/8(22.22)15/16(23.81).057(.025).065(.029).393.443VHSS30 3/0 Str. #2-3/0 Str.VHSS40 4/0 Str. #1-4/0 Str.VC7(ALL)2-1/8(53.98)2-1/8(53.98)1(25.4)1(25.4).094(.042).094(.042).490.547VHSS250 250 MCM 1/0-250 MCM2-1/4(57.15)1 1/16(26.97).12(.054).595VHSS300 300 MCM 2/0-300 MCM2-1/4(57.15)1 1/16(26.97).14(.063).650VHSS350 350 MCM 3/0-350 MCMVHSS400 400 MCM 4/0-400 MCMVHSS500 500 MCM 4/0-500 MCMVC63VC7VC6FTVC7FTVC8**2 3/8(60.32)2 1/2(63.5)2 7/8(73.02)1 1/8(28.58)1 3/16(30.16)1 3/8(34.92).17(.077).31(.14).32(.14).700.762.834VHSS600 600 MCM 250-600 MCM VC6FTVC7FTVHSS750 750 MCM 500-750 MCMVC8**2 7/8(73.02)3 3/8(85.72)1 3/8(34.92)1 5/8(41.28).41(.19).54(.24).9231.030Refer to page DF-33 for recommended tool and die information.**Type VC8 compression tool crimping range is 500-1500 MCM Cu.HIGH VOLTAGE APPLICATIONS—All Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) arerated at 34.5 KV. The other U.L. listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximumUL voltage requirement of less than 2000 volts, however Anderson recommends these connectors for applicationthrough 34.5 KV subject to manufacturers’ limitations for insulation material. For further information, contact factory.MARCH 2008HUBBELL – CENTRALIA, MISSOURI
Page 1 and 2:
DISTRIBUTION PRODUCTSINDEXSection D
Page 3 and 4:
• Fastest method of deadending Co
Page 5 and 6:
DISTRIBUTION CONNECTORSDEADENDSAUTO
Page 7 and 8:
• Redesigned GDW2000 Series• Fa
Page 9 and 10:
DISTRIBUTION CONNECTORSSECTION DADE
Page 11 and 12:
For distribution and light transmis
Page 13 and 14:
DISTRIBUTION CONNECTORSDEADENDSBOLT
Page 15 and 16:
Page 17 and 18:
For high tension transmission line
Page 19 and 20:
Page 21 and 22:
For deadending static wires.May be
Page 23 and 24:
For distribution and light transmis
Page 25 and 26:
These clamps are recommended for co
Page 27 and 28:
These clamps are used primarily for
Page 29 and 30:
DISTRIBUTION CONNECTORSSECTION DADU
Page 31 and 32:
DISTRIBUTION CONNECTORSSECTION DAIN
Page 33 and 34:
For aluminum or ACSR triplex conduc
Page 35 and 36:
DEADENDSBOLTED QUADRANT STRAIN CLAM
Page 37 and 38:
OVERHEAD LINE SPLICESAUTOMATICCOPPE
Page 39 and 40:
OVERHEAD LINE SPLICESAUTOMATICALUMI
Page 41 and 42:
OVERHEAD LINE SPLICESAUTOMATICBI-ME
Page 43 and 44:
OVERHEAD LINE SPLICES: AL AND AL-CU
Page 45 and 46:
OVERHEAD LINE SPLICES: AL AND AL-CU
Page 47 and 48:
• ANSI C119.4, partial tension, C
Page 49 and 50:
OVERHEAD LINE SPLICES: AACCOMPRESSI
Page 51 and 52:
OVERHEAD LINE SPLICESCOMPRESSIONFUL
Page 53 and 54:
VERSA-CRIMP® ALUMINUM COMPRESSION
Page 55 and 56:
OVERHEAD LINE SPLICES-CUCOMPRESSION
Page 57 and 58:
VACL/VACS/VACT—Anderson/BurndyCON
Page 59 and 60:
CONVENTIONAL COMPRESSION DIE TOOLIN
Page 61 and 62:
Page 63 and 64:
OVERHEAD PRIMARY TAPSHOT LINE TAP C
Page 65 and 66:
Page 67 and 68:
OVERHEAD PRIMARY TAPS AND STIRRUP P
Page 69 and 70:
Page 71 and 72:
OVERHEAD PRIMARY TAPSLIGHTNING ARRE
Page 73 and 74:
OVERHEAD PRIMARY TAPSHOT LINE CONNE
Page 75 and 76:
OVERHEAD PRIMARY TAPSSTIRRUP CLAMPS
Page 77 and 78:
OVERHEAD PRIMARY TAPSBOLTEDSTIRRUP
Page 79 and 80:
OVERHEAD PRIMARY TAPSSTIRRUP CONNEC
Page 81 and 82:
HEAVY DUTY COMPRESSION STIRRUPTYPE
Page 83 and 84:
OVERHEAD PRIMARY TAPSCOMPRESSIONVER
Page 85 and 86:
VERSAtile ALUMINUM COMPRESSION TEEA
Page 87 and 88:
VERSA-CRIMP® ALUMINUM COMPRESSION
Page 89 and 90:
VERSAtile COPPER COMPRESSION TEECOP
Page 91 and 92:
VACL/VACS/VACT—Anderson/BurndyCON
Page 93 and 94:
VCCTCONVENTIONAL COMPRESSION DIE TO
Page 95 and 96:
DISTRIBUTION PRODUCTSINDEXgeneral u
Page 97 and 98:
SECTION DDALUMINUMGA9000DISTRIBUTIO
Page 99 and 100:
SECTION DDDISTRIBUTION CONNECTORSBR
Page 101 and 102:
SECTION DDDISTRIBUTION CONNECTORSGE
Page 103 and 104:
SECTION DDDISTRIBUTION CONNECTORSBR
Page 105 and 106:
SECTION DDBRONZELAT, GC207LADISTRIB
Page 107 and 108:
SECTION DDFASTENERS DISTRIBUTION AN
Page 109 and 110:
SECTION DDALUMINUMGO32DISTRIBUTION
Page 111 and 112:
SECTION DDDISTRIBUTION CONNECTORSSE
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
SECTION DDALUMINUMLC50 & LC80DISTRI
Page 121 and 122:
SECTION DDALUMINUMLCU10DISTRIBUTION
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
SECTION DDBRONZELC1000DISTRIBUTION
Page 129 and 130:
SECTION DDBRONZELC400DISTRIBUTION C
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
SECTION DEALUMINUMTSCDISTRIBUTION C
Page 143 and 144:
SECTION DEALUMINUM97642DISTRIBUTION
Page 145 and 146:
SECTION DEDISTRIBUTION CONNECTORSBR
Page 147 and 148:
SECTION DEDUCTILE IRONGWB1SDISTRIBU
Page 149 and 150:
SECTION DEDISTRIBUTION CONNECTORST2
Page 151 and 152:
SECTION DEDISTRIBUTION CONNECTORSDE
Page 153 and 154:
SECTION DEALUMINUMHAST2DISTRIBUTION
Page 155 and 156:
Page 157 and 158:
SECTION DFDISTRIBUTION CONNECTORSVE
Page 159 and 160:
SECTION DFDISTRIBUTION CONNECTORSBI
Page 161 and 162:
SECTION DFDISTRIBUTION CONNECTORSAL
Page 163 and 164:
SECTION DFDISTRIBUTION CONNECTORSTY
Page 165 and 166:
Page 167 and 168:
SECTION DFDISTRIBUTION CONNECTORSSH
Page 169 and 170:
SECTION DFDISTRIBUTION CONNECTORSDI
Page 171 and 172:
SECTION DFDISTRIBUTION CONNECTORSDF
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
SECTION DFDISTRIBUTION CONNECTORSTY
Page 181 and 182:
SECTION DFDISTRIBUTION CONNECTORSTI
Page 183 and 184:
SECTION DFCOPPERBCLDISTRIBUTION CON
Page 185 and 186:
SECTION DFDISTRIBUTION CONNECTORSCa
Page 187 and 188:
Page 189 and 190:
SECTION DFALUMINUMVCSEDLDISTRIBUTIO
Page 191 and 192:
SECTION DFALUMINUMVAUS5"2-7/16" 2-7
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
SECTION DFCOPPERVHSSDISTRIBUTION CO
Page 201 and 202:
SECTION DFCOPPERVCCDISTRIBUTION CON
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
TELECOM & GROUND CONNECTORSVISE TYP
Page 219 and 220:
TELECOM CONNECTORSVISE TYPEBRONZEBR
Page 221 and 222:
SPECIAL TELECOMVISE TYPEBRONZEGROUN
Page 223 and 224:
Page 225 and 226:
POLYPROPYLENEGSOTHER DISTRIBUTIONON
Page 227 and 228:
VINYLRG100 seriesOTHER DISTRIBUTION
Page 229 and 230:
DESCRIPTIONINHIBITORSHTJCDISTRIBUTI
Page 231 and 232:
DESCRIPTIONINHIBITORSVERSA-SEAL®VS
Page 233 and 234:
JOINT COMPOUND REQUIREDHTJCDISTRIBU
Page 235 and 236:
TAMPERPROOF EQUIPMENT LOCKSLOCKSGM3
Page 237 and 238:
Page 239 and 240:
SECTION DJREFERENCE DATADJ2C. For w
Page 241 and 242:
SECTION DJREFERENCE DATARECOMMENDED
Page 243 and 244:
SECTION DJREFERENCE DATAKEY SYMBOLS
Page 245 and 246:
SECTION DJREFERENCE DATANEMA CONSTR
Page 247 and 248:
SECTION DJREFERENCE DATACONDUCTOR Q
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
SECTION DJREFERENCE DATAALUMINUM CO
Page 255 and 256:
SECTION DJREFERENCE DATAALL-ALUMINU
Page 257 and 258:
SECTION DJREFERENCE DATASELF-DAMPIN
Page 259 and 260:
SECTION DJREFERENCE DATAALUMINUM CO
Page 261 and 262:
SECTION DJREFERENCE DATAGALVANIZED
Page 263 and 264:
FORMED WIRE PRODUCTSINDEXDISTRIBUTI
Page 265 and 266:
ALUMINUM/STEELAWDEDEADENDSFORMED WI
Page 267 and 268:
ALUMINUM / STEELDGFWDEADENDSFORMED
Page 269 and 270:
ALUMINUM / STEELLDICTOP TIEFORMED W
Page 271 and 272:
ALUMINUM / STEELLDIFTOP TIEFORMED W
Page 273 and 274:
ALUMINUM / STEELLDIJTOP TIEFORMED W
Page 275 and 276:
ALUMINUM ALLOYLDID0xxxDOUBLE SUPPOR
Page 277 and 278:
ALUMINUM / STEELLLAFSIDE TIEFORMED
Page 279 and 280:
ALUMINUM / STEELQWSTCSIDE TIEFORMED
Page 281 and 282:
ALUMINUM / STEELQWSTFSIDE TIEFORMED
Page 283 and 284:
ALUMINUM / STEELLLDU4xxxDOUBLE SIDE
Page 285 and 286:
ALUMINUM ALLOYLROSPOOL TIEFORMED WI
Page 287 and 288:
ALUMINUM ALLOYQWSPSPOOL TIEFORMED W
Page 289 and 290:
COMPOSITE TIEGS900FORMED WIRECOMPOS
Page 291 and 292:
COMPOSITE TIEGJ800/810FORMED WIRECO
Page 293 and 294:
Galvanized Steel Guy Wire DeadendsF
Page 295 and 296:
Service Grip DeadendsSGFW Cross Ref
Page 297 and 298: Distribution Ties - C Neck Insulato
Page 299 and 300: GROUPDistribution Tie - C NeckDistr
Page 301 and 302: Distribution Ties - F Neck Insulato
Page 303 and 304: Distribution Ties - J Neck Insulato
Page 305 and 306: Double Support Ties, C Neck (2-1/4)
Page 307 and 308: Side Ties; F Neck (2-7/8)LLAF Serie
Page 309 and 310: GROUPSide Tie; 2-7/8 NeckSide Tie;
Page 311 and 312: QUIK-WRAP Side Ties, C Neck Insulat
Page 313 and 314: QUIK-WRAP Side Ties, F Neck Insulat
Page 315 and 316: Double Side Ties, J Neck (3-1/2)LLD
Page 317 and 318: Spool Ties, 1-3/4” Neck Diameter
Page 319 and 320: QUIK-WRAP Spool Ties, 1-3/4” Diam
Page 321 and 322: Distribution Formed Wire ProductsAb
Page 323 and 324: U-102-2®ANDERSONPOWER SYSTEMS, INC
Page 331 and 332: U-102-10®ANDERSONPOWER SYSTEMS, IN
Page 335 and 336: U-102-14POWER SYSTEMS, INC.®ANDERS
Page 347: U-102-26POWER SYSTEMS, INC.®ANDERS
Page 355: U-102-58POWER SYSTEMS, INC.®ANDERS
show all

OVERHEAD LINE SPLICES

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?