OVERHEAD LINE SPLICES

REFERENCE DATASECTION DJLETTER SUFFIX DESIGNATIONS TO STANDARD CATALOG NUMBER FORSPECIAL FEATURESA suffix added to a catalog number denotes that a change or modification is to be made to the standard catalog item. The suffixeslisted below are for the convenience of our customers. The list does not include special modifications made for one customeronly but those having general application.CatalogNo.SuffixAAHASBNKBNNBWCCFCRFEEDFTPFWGGAGPHPDescription of Changeor ModificationAluminum loop will be supplied instead ofcopper loop.Advance handle only—VCF and VCF6 hotstick assemblies.Aluminum hardware will be suppliedinstead of the usual (or standard) hardware.Bolt, nut and cotter key will be suppliedinstead of usual clevis pin.Bolt, nut and jam nut will be suppliedinstead of usual clevis pin.Belleville washers will be supplied insteadof usual washers.A clevis fitting will be supplied with strain,suspension and dead end clamps.Center-formed tongue will be supplied onlugs where side formed tongues are standardon bronze and aluminum items.Corona free strain clamp.An eyestem will be supplied instead of theusual hex head bolt. (This applies generallyto stirrup and cable clamps).Everdur (silicon bronze) hardware will besupplied instead of the usual hardware.Flowed-tin plating will be supplied onbronze items. (.0001-.0003 thick andflowed)A flatwasher will be supplied instead of alockwasher.A guide will be supplied on expansion connectors.Galvanized hardware will be suppliedinstead of usual hardware.Tin plating will be supplied on aluminumitems.Hexagon clevis pin furnished instead ofstandard clevis pin.CatalogNo.SuffixHWLWNNSBSSESFSpecialDescription of Changeor ModificationHexagon head bolt with a flat washer underthe head will be supplied instead of the usualbolts.A lockwasher will be supplied instead of aflatwasher.Neither socket nor clevis fittings will be suppliedwith suspension, or dead end clamps.No spacer bar on straight line dead endclamps.A socket will be supplied with suspensionand dead end clamps.A static eliminator spring will be supplied onbus supports.Side formed tongue will be supplied when acenter formed tongue is standard.The catalog number specified is to be modifiedfor particular requirements which theitem will not otherwise fill.TB Electro-tin plate loop (bail) .0002”-.0004”.TPUUDXBXYTin plating will be supplied on bronze items,(Electro-tin .0002”-.0004” thick).U-bolts may be supplied on these items.An undrilled tongue will be supplied on terminalsor lugs.The connector will be supplied with thegrooves coated with a petroleum base sealantand enclosed in a polyethylene bag.Contact surface finished on both sides oftongue.*This suffix will appear on the connector or fitting as part of the catalog number. Other suffix designations above will not appearas part of the catalog number unless specifically specified in which case there may be an extra charge to cover thestamping or marking operation.When more than one suffix is required to designate more than one special feature, they should be arranged in alphabeticalorder except when the suffix is published as part of the catalognumber.DJ5DJ-5HUBBELL ® Power Systems August 2010