OVERHEAD LINE SPLICES

These clamps are recommended for copper or Copperweld® conductor. Type BSCG is supplied with a standoffguide to assure clearance between conductor and insulatordisc when clamps are used as a through type deadend orstrain.Material:Body—high strength aluminum bronze alloyKeeper and Guide—electrical bronzeHardware—galvanized steelSockets and Clevises—ductile iron, galvanizedCotter Pin—#302 stainless steelDISTRIBUTION CONNECTORSDEADENDSBOLTEDSTRAIGHT LINE STRAIN CLAMPBRONZESECTION DABRONZEBSC/BSCGDA23CATALOGNUMBERBSC024NBSC024SBSC024CBSC050NBSC050SBSC050CBSC100NBSC100SBSC100CBSCG024SBSCG024CBSCG050SBSCG050CBSCG100SBSCG100CFITTINGTYPE CAT.NO. COPPERNoneSocketClevisNoneSocketClevisNoneSocketClevisSocketClevisSocketClevisSocketClevis--SA04CA04--SA04CA04--SA04CA04SA04CA04SA04CA04SA04CA04CLAMPING RANGE#2 Sol.To4/0 Str.4/0 Str.To550 MCM500To1000 MCM#2 Sol.To4/0 Str.4/0 Str.To550 MCM500To1000 MCMINCHES(MM).258-.528(6.55-13.41).52-.875(13.21-22.23).81-1.25(20.57-31.75).258-.528(6.55-13.41).52-.875(13.21-22.23).81-1.25(20.57-31.75)ULTIMATEBODYSTRENGTHLBS. (KG)8,000(3,629)8,000(3,629)10,000(4,536)8,000(3,629)8,000(3,629)10,000(4,536)NO.223212131U-BOLTSDIMENSIONSINCHES (MM)SIZEINHCES(MM) L W1/2(12.70)1/2(12.70)1/2(12.70)1/2 (12.70)3/8 (9.53)1/2 (12.70)3/8 (9.53)1/2 (12.70)1/2 (12.70)9-1/8(231.78)9-5/8(244.48)13-1/8(333.38)9-1/8(231.78)9-5/8(244.48)13-1/8(333.38)11/16(17.46)11/16(17.46)13/16(20.64)11/16(17.46)11/16(17.46)13/16(20.64)APPROX.WT. EACHLBS. (KG)3.1 (1.41)4.4 (2.00)4.4 (2.00)3.8 (1.72)5.1 (2.31)5.1 (2.31)6.9 (3.13)8.2 (3.72)8.2 (3.72)5.2 (2.36)5.2 (2.36)6.8 (3.08)6.8 (3.08)11.0 (4.99)11.0 (4.99)NOTES: (1) Socket or clevis is necessary for Type BSCG to provide clearance for cable guide.(2) Recommended torque on U-bolts; 3/8”—240 in. lbs., 1/2”—480 in. lbs.(3) To obtain silicon bronze hardware add suffix—“ED”. Example, BSC024NED.DA-23HUBBELL ® Power SystemsDecember 2011