OVERHEAD LINE SPLICES

DISTRIBUTION CONNECTORSSECTION DF• Positive center stop and tapered ends.• Installed with popular compression tools and dies fromseveral manufacturers, or VERSA-CRIMP ® dielesssystem.• Prefilled with tension joint compound.• Meets industry requirements for full tension splicing perANSI C119.4.Material:AluminumNote: Refer to type FTR—full tension sleeves for splicinghigher strength alloyed aluminum conductors andsingle core ACSR.FTR splices may also substitute for FTA spliceinstallations.OVERHEAD LINE SPLICESCOMPRESSIONFULL TENSION SPLICES-AACLALUMINUMFTACATALOGNUMBER(1) CONDUCTOR RANGE CONVENTIONAL DIESALUMINUMINCHES(MM)BURNDYINDEXKEARNEYREF.EEIDIA.LLENGTHINCHES (MM)APPROX.WT. 100LBS. (KG)FTA101/0 (7,19) Str..336-.373(8.53-9.47)BGor 2435/85/8-18A7.25(184)16(7)FTA202/0 (7,19) Str. .376-.419(9.55-10.64)2455/85/8-19A9.25(234)25(11)FTA40FTA3374/0 (7,19) Str.336.419 or 37 Str..475-.528(12.06-13.41).603-.666(15.31-16.91)249 840 11A321, 705or 6551-1/8-11-1/8-2—10.50(266)9.87(251)40(18)58(26)DF41FTA35035019, 36, 61 Str..616-.681(15.64-17.29)490or 5471-1/8-11-1/8-2—11.00(279)70(32)FTA397397.519 Str..659-.724(16.73-18.38)468or 6551-1/8-11-1/8-213A12.25(311)84(38)FTA477477 or 50019 or 37 Str..722-.814(18.33-20.68)317, 327or 4261-1/8-2 14A12.75(324)113(51)FTA556556.519 or 37 Str..780-.858(19.81-21.79)261or 3181-5/16 15A12.75(324)138(63)FTA63663637 Str..835-.918(21.20-23.21)469 1-1/2 —13.5(343)157(71)FTA795750-80037 or 61 Str..998-1.031(23.67-26.18)3421-1/21-5/8—13.62(346)199(90)(1) Compact strand sizes within the O.D. inch range may be used.DF-41HUBBELL ® Power Systems April 2012