OVERHEAD LINE SPLICES

DISTRIBUTION CONNECTORSSECTION DADUCTILE DEADEND THIMBLETYPE DDTProvides a convenient and efficient means for loopdeadending of steel static wire and bare or insulatedaluminum or copper phase wires. Magnetic inductionheating will occur.Material: Body – ductile iron, galvanizedClevis Pin – galvanized steelCotter Pin - #302 stainless steelDUCTILE IRONDDTDA27CATALOGNUMBERDDT07CONDUCTORRANGE INCHES(MM)0-.875(0.22.23)ULTIMATEBODYSTRENGTHLBS. (KG)40,000 (18,144)0-1.0DDT12* (0-25.40)60,000 (27.216)*Bolt, Nut & Cotter Pin are standard.DIMENSIONS INCHES (MM)L B W H PD5 3/8(136.53)7 13/16(45.97)2 5/16(58.74)3 3/4(95.25)7/8(22.23)1 5/16(33.27)APPROX.WT. EACHLBS. (KG)3 1/4 (82.55) 3/4 (19) 2.5 (1.13)3 3/4 (95.25) 1 (25)* 5.7 (2.5)DEADENDSALUMINUM DEADEND THIMBLETYPE ADETALUMINUMADETProvides a convenient and efficient means for loop deadendingof steel static wire and bare or insulated aluminumphase wires. Generous pulling eye for easyinstallation.Material: Body – high strength aluminum alloyClevis Pin – galvanized steelCotter Pin - #302 stainless steelCATALOGNUMBERADET75ADET88CONDUCTOR RANGEINCHES (MM) RATED STRENGTH LBS. DIMENSIONS INCHES (MM)GUYACSR WIRE THIMBLE EYE A B C D E F#6 – 336.4 3/16 – 5/16 10,000 6,000 0.75 (19) 1.5 (38.1) 2.12 (53.8) 0.63 (16) 3 (76.2)#6 – 477 3/16 – 3/8 12,000 7,000 0.88 (22.4) 1.5 (38.1) 2.12 (53.8) 0.63 (16) 3 (76.2)4.81(122.2)4.81(122.2)DA-27HUBBELL ® Power SystemsDecember 2011