OVERHEAD LINE SPLICES

DISTRIBUTION CONNECTORSSECTION DFCATALOGNUMBERNO.PADHOLESTYPE VHCS Copper Compression Terminal (continued)COPPER CONDUCTORCONVEN-TIONALTOOLINGVHCS40012 11/2400 MCM 4/0-400 MCMVHCS40058 1 5/8VHCS50038VHCS5001211*VC6500VC63VC7VC6FT3/81/2500 MCM 4/0-500 MCM VC7FTVHCS50058 1 5/8VHCS50012BN 2 1/2VHCS60058 15/8600 MCM 250-600 MCMVHCS60012BNVHCS7505821VC6FTVC7FTVC8*1/25/8750 MCM 500-750 MCMVHCS75012BN 2 1/2DIMENSIONS INCHES (MM)VERSA-VERSA-CRIMP ®SYSTEM RANGECRIMP ®TOOLTYPEPADBOLTDIA. L B W C T3-3/8(85.72) 1-3/163-5/8 (30.16)(92.08)3-1/2(88.9)3-3/4(95.25)3-7/8(98.42)5-3/8(136.52)1-3/8(34.92)4-1/4(107.95) 1-3/85-1/2 (34.92)(139.70)5(127.0) 1-5/86-1/16 (41.28)(153.97)1 -3/8(34.92)1-1/2(38.1)1-11/16(42.86)1-15/16(49.21)—————1-3/4(44.45)—1-3/4(44.45)—1-3/4(44.45)3/16(4.76)1/4(6.35)1/4(6.35)1/4(6.35)LISTED261LAPPROX.WT. EACHLBS. (KG).24(.109).24(.109).35(.159).35(.159).35(.159).41(.186).50(.227).55(.249).65(.295).70(.317)I.D.(INCHES).762.762.834.834.834.834.923.9231.0301.030Refer to page DF-31 for recommended tool and die information.*VC8 tool crimping range is 500-1500 MCM Cu.HIGH VOLTAGE APPLICATIONS—All Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) arerated at 34.5 KV. The other U.L. Listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximumUL voltage requirement of less than 2000 volts, however Anderson recommends these connectors for applicationthrough 34.5 KV subject to the manufacturers’ limitations for insulation material.For further information, contact factory.DF21DF-21HUBBELL ® Power Systems April 2012