OVERHEAD LINE SPLICES

These clamps are used primarily for deadending coppersubstation cable bus.When installing, cable will slide freely under the U-bolts.If preferred, U-bolts may be removed and cable laid inclamp grooves from the side.These clamps are compact for greatest phase clearance.Material:Body and Keeper—high strength bronzeHardware—galvanized steelSockets and Clevises—ductile iron, galvanizedCotter Pin—#302 stainless steelDISTRIBUTION CONNECTORSDEADENDSBOLTEDQUADRANT STRAIN CLAMPBRONZESECTION DABRONZEBR1/BR2DA25CATALOGNUMBERBR1025NBR1025SBR1025CBR1050NBR1050SBR1050CBR1100NBR1100SBR1100CBR1150NBR1150SBR1150CBR1200NBR1200SBR1200CBR2025NBR2025SBR2025CBR2050NBR2050SBR2050CBR2100NBR2100SBR2100CFITTINGTYPE CAT. NO. COPPERNoneSocketClevisNoneSocketClevisNoneSocketClevisNoneSocketClevisNoneSocketClevisNoneSocketClevisNoneSocketClevisNoneSocketClevis--SA06CA06--SA06CA06--SA06CA06--SA06CA06--SA06CA06--SA06CA06--SA06CA06--SA06CA06CLAMPING RANGE2/0 Sol.To250-19 Str.250-19 Str.To500 MCM500To1000 MCM1000To1500 MCM1500 MCMTo2000-Str.2/0 Sol.To250-19 Str.250-19 Str.To500 MCM500To1000 MCMINCHES(MM).365-.574(9.27-14.58).574-.813(14.58-20.65).811-1.152(20.60-29.26)1.150-1.412(29.21-35.86)1.411-1.632(35.84-41.40).365-.574(9.27-14.58).574-.813(14.58-20.65).811-1.152(20.60-29.26)ULTIMATEBODYSTRENGTHLBS. (KG)8,000(3,629)10,000(4,536)15,000(6,804)15,000(6,804)15,000(6,804)8,000(3,629)10,000(4,536)15,000(6,804)NO.33333333U-BOLTSDIMENSIONSINCHES (MM)SIZEINCHES(MM) L W H3/8(9.53)1/2(12.70)1/2(12.70)5/8(15.88)5/8(15.88)3/8(9.53)1/2(12.70)1/2(12.70)8-1/16(204.79)8-7/8(225.43)9-1/8(231.78)10-1/2(266.70)12-3/4(323.85)8-1/16(204.79)8-3/4(222.25)9-1/8(231.78)---------------21/32(16.67)7/8(22.23)1-3/16(30.16)3-5/32(80.17)33/8(85.73)3-7/8(98.43)4-3/8(111.13)5(127)3-5/32(80.17)3-1/4(82.55)3-7/8(98.43)APPROX.WT. EACHLBS. (MM)5.4 (2.45)6.7 (3.04)7.1 (3.22)7.0 (3.18)8.3 (3.76)8.7 (3.95)9.2 (4.17)10.5 (4.76)10.9 (4.95)13.4 (6.08)14.7 (3.67)16.1 (7.30)15.0 (6.80)16.3 (7.39)16.7 (7.58)5.7 (2.59)7.0 (3.18)7.4 (3.36)10.0 (4.54)11.3 (5.13)11.7 (5.31)14.0 (6.35)15.3 (6.95)15.7 (7.12)NOTE: Recommended torque on U-bolts; 3/8”—240 in.-lbs., 1/2”—480 in.-lbs., 5/8”—720 in.-lbs.DA-25HUBBELL ® Power SystemsDecember 2011