OVERHEAD LINE SPLICES

SECTION DFDISTRIBUTION CONNECTORSDF58VACL/VACS/VACT—Anderson/OthersTABULATION CONTINUEDCONVENTIONAL COMPRESSION DIE TOOLING(Crimps per Connection)ANDERSON VERSA-CRIMP COMPRESSION TOOLS(Crimps per Connection)Thomas & Betts(Crimps)Kearney(Crimps)Blackburn(Crimps)VERSA-CRIMP Tools(Number of Crimps)Hyd. Tools12 Ton 15 TonToolsTBM5TBM8Tools(No. of Crimps)ToolJB-12AToolOD-58WH-2PH-2 Die Die DieWH-1PH-1Die Die Die O-52DieColorCode➁WireSize(AWGorMCM)VC6 VC8➀ NIBSFT ALVC6➀VC6350*VC6500V-C ToolsWireRange(AWG orMCM)CatalogNumberVACL➂VACS➃VACT➃24(1)24(1)Blue(1)1/4 (2)B73CH(1)BY17C(2)Blue#8AL/CU-8 #8 AL/CU 1 129(2)29(2)Gray(2)5/16 (3) (1) (1)B74CH(1)BY19C(3)Gray#6AL/CU-6 #6 AL/CU 1 137(2)37(2)Green(2)3/8 (3) (2) (2)U4CABT★ (1)BY21C(3)Green#4AL/CU-4 #4 AL/CU 2 245(2)45(2)Pink(2)1/2 (3) (2) (2)BO6CH(1)BY23C(3)Pink#2AL/CU2 2 2 2#6-#2AL/CU-250(2)50(2)Tan(2)9/16 (4) (2) (2)U25ART★ (1)BY23C(4)Tan#1AL/CU2 2 2 2#8-#1AL/CU-150(2)50(2)Tan(2)9/16 (4) (2) (2)U25ART★ (1)BY25C(4)Tan1/0AL/CU2 2 2 2#8-1/0AL/CU-1/054H(2)54(1)Olive(2)5/8-1 (4) (3) (3)B09CH(2)BY31C(4)Olive2/0AL/CU2 2 2 2#4-2/0AL/CU-2/062(1)62(1)Ruby(2)11/16 (5) (3) (3)B26CH(2)BY27C(5)Ruby3/0AL/CU2 2 2 2#4-3/0AL/CU-3/071H(3)71H(3)+ White(4)781 (5) (3) (3)B10CH1(2)BY35C(5)White4/0AL/CU3 3 2 2#2-4/0AL/CU-4/076(2)76H(3)+ Red(5)840 (5) (3) (3)B11CH(2)BY37C(5)Red250AL/CU3 3 2 21/0-250AL/CU-25087H(3)87H(3)+ Blue(5)29/32 (2) (2)B61EA(1)Blue300AL/CU3 3 2 21/0-300AL/CU2/0-350AL/CU3/0-400AL/CU4/0-500AL/CU-30094H(3)94H(3)+ Brown(5)B12CH1(2)350AL/CU-3501-1/8-1 (2) (2)Brown4 3 3➀99H(3)99H(3)B80EA(2)400AL/CU44-4001-1/8-1 (2) (2)Green5O’lapO’lap➀96(2)96H(4)B80EA(3)500AL/CU44-5001-1/8-2 (2) (2)Green7O’lapO’lap➀106H(5)106H(5)1-5/16 (4)B20AH(3)4 3 600 AL Pink350-600 AL350- 500 CU-600106H(5)106H(5)1-5/16 (4)B20AH(3)4 3 750 AL Pink500-750 AL500 CU-7503 1000 AL Brown750-1000AL-1000+ TBM-8 Tool ONLY★ Anderson’s HC-12 Dies, Burndy’s Y-35 Dies and Blackburn’s JB-12 Dies are interchangeable.➀ “VACL” Lug sizes -350 to -500 take 1 less crimp (VC6 Tools) than shown.➁ Color code is for Anderson and Burndy dies only. Use the recommended die number (NOT die color) for Blackburn, Kearney & T&B Hyd. Tools/Dies.➂ The “VACL” lugs are qualified for U/L “HV” applications.➃ The “VACS” sleeves and “VACT” tee connectors are for AL to AL or AL to CU connections ONLY. (NOT for CU to CU connections).* Not UL Listed-pending completion of test.DF-58April 2012HUBBELL ® Power Systems