OVERHEAD LINE SPLICES

DISTRIBUTION CONNECTORSVERSAtile ALUMINUM COMPRESSION TERMINALTYPE VCEL• For use with either VERSA-CRIMP ® or conventional compressiontools.• For size-for-size replacements for original equipment set screwmechanical lugs, when recommended by the equipment manufacturer.• UL listed for both concentric and compact aluminum and concentriccopper conductor.• Meets NEMA CC3-1973 Class A performance on aluminumconcentric conductor.• Color coded end plugs for easy die selection (see page DF-16).Material:Body—Aluminum Tin PlatedFactory inhibitedLISTED261LTWL1 3/4Fig. 2 Fig. 1SECTION DFALUMINUMVCELCATALOGNUMBERFIG.NO.VCEL02114S1 1DIMENSIONSALUMINUM OR COPPER CONDUCTOR VERSA-CRIMP PADINCHES (MM)CONVENTIONALTOOLING RANGEVERSA-CRIMPSYSTEM RANGETOOLTYPEBOLTDIA. L W TVCEL021516H1 1 1/0 Str. Al/Cu #8—1/0 Str. Al/Cu5/16VCEL02138H1 1 3/8VCEL022516H1 12/0 Str. Al/Cu #1—2/0 Str. Al/CuVC6VCEL02238H1 1 3/8(ALL)VCEL024516H1 15/164/0 Str. Al/Cu 2/0—4/0 Str. Al/CuVCEL02438H1 1 3/8VCEL030516H1 1300 MCM Al/Cu #4—300 MCM Al/CuVCEL03038H1 1 3/8VCEL035516H1 15/16350 MCM Al/Cu 250-350 MCM Al/CuVCEL03538H1 1 3/8VC63VCEL05038H1 13/8VC6FT500 MCM Al/Cu 2/0—500 MCM Al/CuVCEL05012H1 1 1/2VCEL05012H2 2 500 MCM Al/Cu 2/0—500 MCM Al/Cu 1/2VCEL06012H1 1 600 MCM AlVCEL06012H2 2 600 MCM AlVCEL07512H1 1 750 MCM AlVCEL07512H2 2 750 MCM Al400-600—MCM Al400—500 MCM Cu400-600—MCM Al400—500 MCM Cu500-750—MCM Al500 MCM Cu500-750—MCM Al500 MCM CuVC6FTAL9CU (90° RATED)APPROX.WT. EACHLBS. (KG)I.D.(INCHES)HIGH VOLTAGE APPLICATIONS—All Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) arerated at 34.5KV. The other U.L. Listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximumUL voltage requirement of less than 2000 volts, however Anderson recommends these connectors for applicationthrough 34.5 KV subject to manufacturers’ limitations for insulation material.For further information, contact factory.1/45/165/161/21/21/21/21-3/4(44.5)1-3/4(44.5)1-27/32(46.7)2-17/64(57.4)2-17/64(57.4)2-17/64(57.4)2-17/64(57.4)2-17/64(57.4)2-17/64(57.4)2-17/64(57.4)2-17/64(57.4)3-13/32(86.4)3-13/32(86.4)5-3/64(128.0)3-21/32(92.7)5-9/32(134.4)3-21/32(92.7)5-9/32(134.4)39/64(15.2)39/64(15.2)11/16(17.5)1(25.4)1(25.4)1(25.4)1(25.4)1(25.4)1(25.4)1(25.4)1(25.4)1-3/16(30.1)1-3/16(30.1)1-3/16(30.1)1-5/16(33.0)1-5/16(33.0)1-5/16(33.0)1-5/16(33.0)1/4(6.4)1/4(6.4)11/64(4.4)9/32(7.1)9/32(7.1)9/32(7.1)9/32(7.1)9/32(7.1)9/32(7.1)9/32(7.1)9/32(7.1)1/2(12.7)1/2(12.7)1/2(12.7)1/2(12.7)1/2(12.7)1/2(12.7)1/2(12.7).03(.01).03(.01).03(.01).12(.05).12(.05).11(.05).11(.05).10(.04).10(.04).10(.04).10(.04).20(.09).20(.09).30(.13).28(.13).40(.18).25(.11).36(.16).403.403.403.453.453.562.562.656.656.711.711.844.844.928.928.9281.0311.031DF1DF-1HUBBELL ® Power Systems April 2012