OVERHEAD LINE SPLICES

For distribution and light transmission construction withcopper or Copperweld ® conductor. Power loss, corrosionand heat rise are all reduced to a minimum due to the nonferrousconstructionMaterial:Body—high strength aluminum bronze alloyor red brassKeeper—electrical bronzeHardware—galvanized steelSockets and Clevises—ductile iron, galvanizedCotter Pin—#302 Stainless steelDISTRIBUTION CONNECTORSDEADENDSBOLTEDSTRAIGHT LINE STRAIN CLAMPBRONZESECTION DABRONZEBDEDA21CATALOGNUMBERBDE46NBDE46SBDE46CBDE60NBDE60SBDE60CBDE70NBDE70SBDE70CBDE86NBDE86SBDE86CBDE98NBDE98SBDE98CFITTINGTYPE CAT. NO. COPPERNoneSocketClevisNoneSocketClevisNoneSocketClevisNoneSocketClevisNoneSocketClevis--SA04CA04--SA04CA04--SA04CA04--SA06CA06--SA06CA06CLAMPING RANGE#6 Sol.To4/0 Sol.2/0 Sol.To250 MCM4/0 Sol.To350 MCM4/0-7 Str.To550 MCM350-37 Str.To700 MCMINCHES(MM).16-.46(4.06-11.68).36-.60(9.14-15.24).46-.70(11.68-17.78).52-.86(13.21-21.84).68-.98(17.27-24.89)ULTIMATEBODYSTRENGTHLBS. (KG)6,000(2,722)8,000(3,629)8,000(3,629)8,000(3,629)9,000(4,082)NO.22222U-BOLTSDIMENSIONS(INCHES (MM)SIZEINCHES(MM) L W K3/8(9.53)1/2(12.70)1/2(12.70)1/2(12.70)1/2(12.70)7-1/4(184.15)8-3/4(222.25)10-3/4(273.05)11(279.40)11-5/8(295.28)3/4(19.05)3/4(19.05)3/4(19.05)15/16(23.81)1-1/16(26.99)7/8(22.23)7/8(22.23)15/16(23.81)15/16(23.81)15/16(23.81)APPROX.WT. EACHLBS. (KG)3.2 (1.45)4.4 (2.00)4.8 (2.18)5.6 (2.54)6.9 (3.13)7.2 (3.27)6.5 (2.95)7.8 (3.54)8.1 (3.67)7.0 (3.18)8.3 (3.76)8.7 (3.95)7.4 (3.36)8.7 (3.95)9.1 (4.13)NOTE:(1) Recommended torque on U-bolts; 3/8”—240 in. lbs., 1/2”—480 in. lbs.(2) Lifting eye is standard on keeper for hot line work.DA-21HUBBELL ® Power SystemsDecember 2011