OVERHEAD LINE SPLICES

DISTRIBUTION CONNECTORSSECTION DADEADENDSAUTOMATICGUY WIREFargo GDE5200 Series Automatic deadends are designedfor use on all grades of galvanized steel wirestrand . . . High Strength, Extra High Strength, AlumoWeld,Alumonized, Common, Siemens-Martin,Utilities and Bell System Strand.Innovative yoke design allows for installation withoutuse of a gripping hook.Note: Consult factory for information on other applications.ALUMINUMGDE5200DA7Material:Gripping Unit —Stainless SteelCATALOGNUMBERPRIMARY STRANDAPPLICATION RANGE (IN.) RANGE (MM)GDE52001/4" EHS7#12 (6M) AWGDE5200L1/4" EHS7#12 (6M) AWGDE52015/16" EHS7#10 (10M), 7#11 (8M) AWGDE5201L5/16" EHS7#10 (10M), 7#11 (8M) AW3/8” EHSGDE5202 3#5, 7#8, 7#9 , 12.5M, 14M, 16M AW#4-2/5, #2-3/4, #1-5/2 AWAC3/8" EHSGDE5202L 3#5, 7#8, 7#9 , 12.5M, 14M, 16M AW#4-2/5, #2-3/4, #1-5/2 AWAC7/16" EHSGDE52037#7 (20M), 18M AW#2-2/5, #1-3/4, #1/0-5/2 AWAC7/16" EHSGDE5203L7#7 (20M), 18M AW#2-2/5, #1-3/4, #1/0-5/2 AWACNote: Suffix “L” denotes extended bail.DIMENSIONSA B C0.215-0.270 5.46-6.86 10.0 5.4 1.60.215-0.270 5.46-6.86 13.7 9.1 1.60.270-0.315 6.86-8.00 10.0 5.3 1.80.270-0.315 6.86-8.00 15.3 10.5 1.80.325-0.392 8.26-9.96 11.8 5.7 2.20.325-0.392 8.26-9.96 17.2 11.2 2.20.392-0.458 9.96-11.63 14.6 8.5 2.40.392-0.458 9.96-11.63 18.4 12.4 2.4INSTALLATIONBAILBail for GDE5200 /GDE5200LBail for GDE5201 /GDE5201LBail for GDE5202 /GDE5202LBail for GDE5203 /GDE5203LPART NO.PS3005200PS300552130051523005527Typical Installation with 2nd BailDA-7HUBBELL ® Power SystemsDecember 2011