OVERHEAD LINE SPLICES

ALUMINUM / STEELLDICTOP TIEFORMED WIREINSULATOR TIE “C-NECK”For securing bare or plastic jacketed conductor in the top groove of interchangeable headstyle insulators.Fargo LDIC series formed wire distribution ties are designed for use with ACSR, AAC, AAAC, AWAC ® ,Compacted ACSR & Compacted AAC.C-Neck insulator: 2-1/4” neckdiameterRecommended for use with ANSIClass 55-2 Pin & 55-3 Pin Insulators.Note:Consult factory for informationon other applications.Right hand lay standard.LDICCATALOGNUMBERNOMINAL CONDUCTOR SIZE DIAMETER RANGE PACKAGING PER BOXACSR AAC AAAC MIN MAX UNITS9/16” Minimum Groove RadiusWT LBS(KG)APPLIEDLENGTHINSULATORIDENT. MARKCONDUCT.COLORCODELDIC4000AS #6 (6/1) #4 (7W) C*0.190(4.83)0.215(5.46)10017(7.7)24(610)BLACKBLUELDIC4001AS#4 (6/1) C*#4 (7/1) C*#4 (7W)0.216(5.47)0.244(6.21)10018(8.2)25(635)BLACKBROWNLDIC4002AS#4 (6/1)#4 (7/1)#3 (7W) #4 (7W)0.245(6.23)0.277(7.05)10018(8.2)26(660)BLACKORANGELDIC4003AS #2 (7W) #3 (7W)LDIC4004AS#2 (6/1)#2 (7/1)#1 (6/1)LDIC4005AS 1/0 (6/1)#1 (7W)#1 (19W)1/0 (7W)1/0 (19W)#2 (7W)1/0 (7W)0.278(7.06)0.316(8.03)0.358(9.09)0.315(8.01)0.357(9.08)0.405(10.30)10010010018(8.2)19(8.6)20(9.1)26(660)28(711)30(762)BLACKBLACKBLACKPURPLEREDYELLOWLDIC4006AS 2/0 (6/1)2/0 (7W)2/0 (19W)2/0 (7W)0.406(10.31)0.459(11.67)5017(7.7)25(635)BLACKBLUENOTES:All dimensions: inches (mm) unless otherwise noted.AWAC is a registered trademark of Copperweld Co.*“C” indicates Compact stranding.Add “NT” suffix for no tie tube (Pad). Example: LDIC4005ASNT.6ANDERSON HUBBELL ® ® AUGUST 2012POWER SYSTEMS FARGO