OVERHEAD LINE SPLICES

®ANDERSONPOWER SYSTEMS, INC.DISTRIBUTION CONNECTORSU-102-21COPPERCHLTINNED COPPER LONG BARREL TERMINAL LUGSDESIGNED TO PERMIT OPTIONAL USE OF TYPE CSLSTACKING LUGSTYPE CHL• For use with VERSA-CRIMP ® or conventionaltooling• Extra long top surfaces on NEMA drilled padsprovide compatibility for mounting type CSLstacking lugs so that two conductors can be connectedto each NEMA two hole attachment positionon transformer spade terminals and bus bars.• Each fitting is marked with several manufacturersrecommended crimping dies.• Recommended for copper conductor only.Material: Copper Tin Plated.(1)CATALOGNUMBERCHL10BNCHL20BNCHL30BNCHL40BNCHL250BNCHL300BNCHL350BNCHL400BNCHL500BNCHL600BNCONDUCTOR RANGE& O.D.-INCHES-1/0 Str..360-.3832/0 Str..405-.4303/0 Str..455-.4804/0 Str..505-.535250 Str..550-.580300 Str..610-.640350 Str..660-.690400 Str..715-.745500 Str..795-.830600 Str..870-.905(2)CRIMPINGDIE INDEX12, 1/2 TQ, 4213, 9/16, TS, 4514, 9/16, TU, 5015, 5/8-1, TWTY, 5416, 11/16, TR, 6017, 781, TV, 6618, 840, TX, 7119, 15/16, TX, 7620, 1, TH, 8722, 1-1/8, 96DIMENSIONSINCHES (MM)B C D L T1.37(35)1.50(38)1.50(38)1.62(41)1.62(41)2.00(51)2.00(51)2.12(54)2.25(57)2.68(68)APPROX.WT. 100LBS. (KG)I.D.(INCHES)(1) “TT” suffix indicates that pad is trimmed to 1-3/4” max width to allow side by side mounting of two lugs on NEMA spadeterminals.NOTE: Anderson’s VC63 Versa-Crimp tool will install sizes thru 500 MCM AHL-500-BN. The VC6FT Versa-Crimp installs thru750 MCM AHL 750 BN (Aluminum). A VC8 Versa-Crimp tool will accommodate sizes from 3/0 stranded through 1000MCM AL / 1500 MCM CU.0.84(21)0.84(21)0.90(23)1.03(26)1.12(28)1.21(31)1.31(33)1.40(36)1.53(39)1.68(43)3.06(78)3.06(78)3.15(80)3.25(83)3.25(83)3.37(86)3.37(86)3.37(86)3.37(86)3.50(90)4.87(124)5.03(128)5.09(129)5.50(140)5.50(140)6.10(155)6.25(159)6.44(164)6.56(157)7.50(191)CHL750BN700-750 Str.2.87 1.90 (48) 3.50 7.60 0.27 111 (50)24, 1-5/16, 106C HL750BNTT.964-1.010(73) 1.75 (44) (90) (193) (7) 108 (49)CHL800BN800 Str..998-1.04625, 1-5/16, 1062.87(73)1.90 (48)3.50(90)7.70(196)0.12(3)0.12(3)0.13(3)0.14(4)0.15(4)0.16(4)0.17(4)0.19(5)0.22(6)0.26(7)0.30(8)16 (7) .38317 (8) .42918 (8) .48022 (10) .53826 (12) .58533 (15) .64041 (19) .69252 (24) .74568 (31) .82394 (43) .908128 (58)CHL1000BN1000 Str.3.00 2.18 (55) 3.50 7.90 0.33 155 (70) 1.16227, 1-1/2, 125C HL1000BNTT 1.124-1.152(76) 1.75 (44) (90) (201) (8) 151 (68)1.0141.036• VC7 / VC7FT series tools recommended for copper lugs.HUBBELL – CENTRALIA, MISSOURIMARCH 2008