User Manual - Terasic

Figure 6-25 PLL Symbol11. Click OK and place the pll symbol onto the BDF to the left of the simple_counter symbol. Youcan drag and drop the symbols, if you need to rearrange them. See Figure 6-26.Figure 6-26 Place the PLL Symbol12. Move the mouse so that the cursor (also called the selection tool) is over the pll symbol’s c0output pin. The orthogonal node tool (cross-hair) icon appears.13. Click and drag a bus line from the c0 output to the simple_counter clock input. This action tiesthe pll output to the simple_counter input (see Figure 6-27).60