Fire Alarm Control Panels - Bosch Security Systems

More documents

Recommendations

Info

62 en | Control Panel Programming Fire Alarm Control PanelsPIN Authority LevelMaximum (1)Medium (2)Minimum (3)None (0)Allowed OperationsAll control panel operations, includingprogramming and disable.System test modes, fire drill, reset, silence,view history.Silence, view history.None.Table 8.1: PIN authority levelsThe following window appears:AUTHORITYUSER (01 - 15)Enter the user for whom you want to program the authority level and press [#/Enter]. Thefollowing window appears and scrolls through the following choices:USER 1 ATHRY (_______ )0- NONE1- MAXIMUM2- MEDIUM3- MINIMUMPress the number key that corresponds to your selection. The existing setting is shown inparentheses on the first line. After you have programmed the user authority, the previouswindow appears.8.38.3.1PROG SYSTEMPROG SYSTEM1 - (reserved)2 - TIMERS3 - AC LINE SYNC4 - OPTION BUS5 - PIN REQURED?6 – NAC SIL MODE7 - REMOTE PGMProgram timersShortcut: 0-PROG, 3-PROG SYSTEM, 2-TIMERSThe following window appears:TIMERS1 - SMOKE RESET2 - AC FAIL DLY3 - AUTO SILENCE4 - (reserved)5 - DISPLAY RATESmoke resetShortcut: 0-PROG, 3-PROG SYSTEM, 2-TIMERS2012.08 | 04 | F01U008458 Installation and Operation Manual Bosch Security System, Inc.
Fire Alarm Control Panels Control Panel Programming | en 63This feature determines how long the smoke detector power is off after reset. No alarms areregistered by the system for 5 sec after power is returned.The display scrolls through the TIMERS options. Press [1] for Smoke Reset. The followingwindow appears:SMOKE RESET (__ )(1-16 SECS):_______Enter the time and press [#/Enter]. The existing setting is shown in parentheses on the firstline. After you have programmed the smoke reset, the previous window appears.AC fail delayShortcut: 0-PROG, 3-PROG SYSTEM, 2-TIMERSThis feature sets the number of hours the control panel waits after an AC failure beforesending an AC Failure report. A setting of DC causes the system to send a report when 25% ofthe battery capacity is used.The display scrolls through the TIMERS options. Press [2] for AC FAIL DELAY. The followingwindow appears:AC FAIL DELAY1 - WAIT FOR DC2 - ENTER TIMEThe wait for DC function causes the AC fail report to be sent when the battery is 25%depleted, based on the measured voltage of the battery. If you want to WAIT FOR DC (25percent of capacity), press [1]. The existing setting is displayed in parentheses on the firstline, either “DC”, or the number of hours selected. After you program the AC Fail Delay, theprevious window appears.To ENTER TIME press [2]. The following window appears:AC FAIL DLY (___)(00-24 HRS):_______** For acceptable programming selections for UL864 9 th edition Listed applications, seeProgramming features for UL864, 49.Enter the time and press [#/Enter]. The existing setting is shown in parentheses on the firstline. After you program the AC Fail Delay, the previous window appears.iNotice!When Wait For DC is the existing selection, the Enter Time menu displays DC as the time inhours.Auto silenceShortcut: 0-PROG, 3-PROG SYSTEM, 2-TIMERSThis feature silences the sounding of an alarm condition on selected NACs after a certainamount of time. When you use Auto Silence, pressing [0/Prog] disables the feature and theonly way to turn off an alarm is to manually silence it. Entering between 5 min and 99 minmeans that the alarm sounds for that much time before automatically silencing.Bosch Security System, Inc. Installation and Operation Manual 2012.08 | 04 | F01U008458
Page 6:
MethodenberichtBerliner pairfam Stu
Page 14 and 15: 14 en | Overview Fire Alarm Control
Page 17 and 18: Fire Alarm Control Panels Overview
Page 19 and 20: Fire Alarm Control Panels Overview
Page 22 and 23: 22 en | Installation Fire Alarm Con
Page 30 and 31: 30 en | Connection Fire Alarm Contr
Page 36 and 37: 36 en | System Operation Fire Alarm
Page 50 and 51: 50 en | Programming Fire Alarm Cont
Page 60 and 61: 60 en | Control Panel Programming F
Page 98 and 99: 98 en | Specifications Fire Alarm C
Page 101 and 102: Fire Alarm Control Panels Appendice
Page 107: Fire Alarm Control Panels Appendice
Page 110 and 111: 110 en | Appendices Fire Alarm Cont
Page 112 and 113:
112 en | Appendices Fire Alarm Cont
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 122:
Bosch Security Systems, Inc.130 Per
show all

Fire Alarm Control Panels - Bosch Security Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?