Fire Alarm Control Panels - Bosch Security Systems

Fire Alarm Control Panels Control Panel Programming | en 678.3.6Remote programmingShortcut: 0-PROG, 3-PROG SYSTEM, 7-REMOTE PGMRemote programming allows the panel to be called from a remote site by phone to reconfigureany of the programmable options. When remote programming is disabled, you can stillconnect to the control panel for diagnostics and to view the existing program. PIN numbersare suppressed while remote programming is disabled.REMOTE PGM0- DISABLE1- ENABLEPress [0/Prog] to select DISABLE or [1] to select ENABLE, and the previous window appears.Danger!After any programming change, and especially after remote program changes, completelycheck operation of the control units. Hazards to life and property can result if the system isnot tested for incorrect programming.8.4PROG INPUTSPROG INPUTS1- POINT NUMBER2- POINT FUNCT3- POINT COPYiNotice!Point functions allow quick programming of similarly functioning points (for example, pull stations,smoke detectors) with common settings.For more information on point functions, see Point function, 70.8.4.1Point numberShortcut: 0-PROG, 4-PROG INPUTS, 1-POINT NUMBERPOINT NUMBER (1-255):_____Enter the point number you wish to program and press [#/Enter]. Once you have entered thepoint number, the display scrolls through the following PROG INPUT options:PROG POINT0- FUNCTION1- ALARM/TROUBL2- OUTPUT ZONE3- VERIFICATION4- LATCHING5- DESCRIPTION NEXT PNT PREV PNTPress the number key that corresponds to your selection.Bosch Security System, Inc. Installation and Operation Manual 2012.08 | 04 | F01U008458