Fire Alarm Control Panels - Bosch Security Systems

86 en | Control Panel Programming Fire Alarm Control PanelsiNotice!This feature offers the use of hexadecimal digits (0 through F). Because the specific keys Athrough F are not available on the keypad, use the following equivalent keys: History=A,Test=B, Disable=C, Drill=D, Silence=E, and Reset=FNOTICE!8.7.14/2 Zone ReportShortcut: 0-PROG, 7-PROG FORMATS, 1-4/2 ZONE RPTS4/2 Zone reports consist of an event type (first digit) and a point number (second digit).These reports apply only to points, and only when a 3/1 or 4/2 format is selected.The following window appears:4/2 ZONE RPT0- FIRE ALRM D11- FIRE RSTR D12- WATERFLOW D13- SUPERVISE D14- TROUBLE D15- TRBL RSTR D16- DISABLE D17- DSBL RSTR D18- (RESERVED)9- MOREPress the number key that corresponds with your selection of event type (D1 stands fordigit 1). Press [#/Enter].Pressing [9] retrieves the second digit options (point numbers). The following windowappears:4/2 ZONE RPT1- POINT 9 D22- POINT 10 D23- RETURN TO D1Press the number key that corresponds to your selection. A window based on your previousselection allowing entry of hex digits appears:FIRE ALARM D1 ( )0 THRU 9:A:B:C:D:E:FEnter the digit that corresponds to the selected condition by pressing a number key or one ofthe special keys if a hex character is needed. Press [#/Enter] and the previous displayappears.2012.08 | 04 | F01U008458 Installation and Operation Manual Bosch Security System, Inc.