Fire Alarm Control Panels - Bosch Security Systems

Fire Alarm Control Panels Control Panel Programming | en 97PROGRAM MUX1- MUX EDIT2- MUX PROGRAM3- BUS TYPE4- AUTO PROGRAMFrom the Program MUX menu, press [1] to select MUX Edit. The following window appears:DEVICE TYPE ( )0- NO DEVICE2- SINGLE INPUT3- I/O MODULE4- MUX SMOKE5- SMOKE W/FRZ6- DUAL INPUT7- OCTAL INPUTDescription Model0- NO DEVICE2- SINGLE INPUT D7044/M, D7045, FMM-7045, D7052(ClassA)3- I/O MODULE D70534- MUX SMOKE D7050, D7050TH, D3435- SMOKE W/FRZ Not Used6- DUAL INPUT D7052(Class B)7- OCTAL INPUT D7042Press [0/Prog] for No Device. Then enter the address for the point you wish to delete.After the device is successfully deleted, you return to the Device Type (MUX Edit) sub-menu.An unsuccessful deletion results in an error message (see below) followed by the Device Type(MUX Edit) sub-menu.ERROR –DEVICE FAILED!Warning!Dual point removal!If you remove one point of a dual point address (for example, a D7042 Eight Point Input Module),the second point (and subsequent points) at this address are also removed. For example,if the first point of a D7042 is removed, the remaining seven points are also removed.Bosch Security System, Inc. Installation and Operation Manual 2012.08 | 04 | F01U008458